|
| efghiagt |
|
|||
|
how would u put the main nf interior light into a ef ghia?
|
|||
| Top | |
|||
| Krytox |
|
|||
|
cut the roof lining a little more and screw it in.
All wires are there for it, just needs a tickle.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| OZBMX |
|
|||
|
I personally didn't cut the roof lining anymore But I aquired a fairlane loom as there was only 2 wires at the center light as it's earthed out to the roof although the wires are further bck going to the other light's.
_________________ Signature removed by moderator.signature must not exceed 120x500 pixles |
|||
| Top | |
|||
| BenJ |
|
||
|
Just make sure you get the NF Light Plug too, as this is quite different to the Fairmont one.
Cheers BenJ
_________________ {DESCRIPTION} - Current Ride |
||
| Top | |
||
| snap0964 |
|
|||
|
Along with that white plastic mounting base.
They'll be a slight marking visible frontside in the headlining due to the mid series light, but not a big issue.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Rick_Deckard |
|
|||
|
{USERNAME} wrote: Along with that white plastic mounting base. They'll be a slight marking visible frontside in the headlining due to the mid series light, but not a big issue. Yep, it's real handy having that mounting base. Loom is another must too. One of the easiest mods this one.
_________________ E39 523i |
|||
| Top | |
|||
| XRfairmont67 |
|
|||
|
this is fitted to an ED GLI, note the slight gap at the front middle to the hoodlining as snap0964 mentioned
|
|||
| Top | |
|||
| efghiagt |
|
|||
|
Ah ok i see so the the fairlane lights are shorter in length but wider , but i say in picture the look pretty fancy and much betr than the falcon interior lights.
Wat would b best to put down front near the front windscreen like on the au's? I found when i open my car at night the front half of the car looks very dark, help? |
|||
| Top | |
|||
| XRfairmont67 |
|
|||
|
could leave the map lights on when the interior light comes on, light up the whole dash
ive put footwell lights into my el same style as the fairmonts and fairlanes |
|||
| Top | |
|||
| OZBMX |
|
|||
|
{USERNAME} wrote: Ah ok i see so the the fairlane lights are shorter in length but wider , but i say in picture the look pretty fancy and much betr than the falcon interior lights. Wat would b best to put down front near the front windscreen like on the au's? I found when i open my car at night the front half of the car looks very dark, help? the longer and wider, just because the way the old light made an indent from being up the 15yrs, The Fairlanes use a much brighter main bulb, much brighter.  By the way guys the exploder come with the same light but setup differently they don't use the plug but screw into connectors basicaly make sure you use that plastic dummy plate oherwise when you plug it in it'll go bang.
_________________ Signature removed by moderator.signature must not exceed 120x500 pixles |
|||
| Top | |
|||
| efghiagt |
|
|||
|
My ef2 ghia came with footwell lights already but since i swapped out most globes with aftermarket festoon and wedge leds the area the light covers is very small but. I would like to hook up my reading lights with the door switch but bayonet style aftermarket leds work only in one direction so they dont work in my front and rear reading lights. Im curious to know what globe/festoon lights are in the nf/nl interior light?
|
|||
| Top | |
|||
| XRfairmont67 |
|
|||
|
the side map lights are t10 5w wedge fittings and the main light is t15 10w wedge the main lamp u can get a bank of leds and just use the t10 wedge base
this style will fit, thats what im using http://cgi.ebay.com.au/2-x-White-18-LED ... 414ad6fc70 |
|||
| Top | |
|||
| daniel000 |
|
||
|
Hey guys
I have myself a NL interior light. I just have some problem with the wiring. Now as it stands, there were 3 wires for my existing EF setup and with the NL one + the loom there are 3 wires. I connecting them all up, ground to ground and the other two for the main light as well as the reading lights. I can get the reading lights working but when the doors open the main light will not light up Just wondering if i have to run more wires for this main light to work ? Thanks Daniel |
||
| Top | |
||
| daniel000 |
|
||
|
Hey guys
I have myself a NL interior light. I just have some problem with the wiring. Now as it stands, there were 3 wires for my existing EF setup and with the NL one + the loom there are 3 wires. I connecting them all up, ground to ground and the other two for the main light as well as the reading lights. I can get the reading lights working but when the doors open the main light will not light up Just wondering if i have to run more wires for this main light to work ? Thanks Daniel |
||
| Top | |
||
| daniel000 |
|
||
|
anyone able to assist in the wiring from the EF to set it up for the NL with the loom ?
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 36 guests |
