i need help!!!!

i removed this loom from my old Fairmont Ghia EA about 12 months ago while i was wrecking it. i have now decided to install it in my new EA which is a Fairmont (not Ghia) and its all going smoothly untill i go to plug in the actual power window loom to the main loom.

i cant seem to find where the plug goes into. shouldnt it be there on all models as power windows were an option throughout the whole range?

i layed down and moved all the plugs around to see if there is one hidden but there is none. there is possibly 2 plugs that would fit but dont have wires to all the plugs like this one has.

has anyone else done this mod and had this issue?

i also have an EB Fairmont Ghia loom here but i dont want to fit it unless i have to as its more then likely that the plugs under the dash wont match up...

pics are on their way. (since DOWNgrading to vista my image resizing program doesnt work)

bumpage... anyone know what to do? i have a manual but its not at my place a mate is borrowing it so i cant even check it in there.

work out if you have power to the other plugs.
if you car didn't come with power windows, you probably wont even have a fuse in the fusebox and only 1 terminal in the correct fuse spot.
i have installed front power windows in my gli and i just wired it up at the fuse box the factory way.

i would assume that if its a factory option the plug would be included on the loom... i guess i might have to heek up the EB loom them...


anyone got EB tail lights and garnish?

on ef's they definitely dont have the plug.
mine only had 1 wire at the fuse box with no output or fuse.
ea-ed might be different though.

well with the EA's the power window loom was seperate where as in the EB they were included in the loom