|
| ef_falcon_95 |
|
|||
|
I want to put rear power windows in my el xr6, it already has front .
I have the cup holder switches , body loom and window motors . My question is instead of swapping body looms . Which to me is a big job. Can I butcher the body loom and cut the power window plugs, wiring etc and splice it into my existing power window loom .? I am aware that I will have to rip up the carpet and run the wires down to the rear windows .
_________________ El XR6 Turbo |
|||
| Top | |
|||
| EFFUTURA4.05SP |
|
|||
|
Im not sure here but, the harness may be there already??
For instance my missus car (EF GLI) had wiring for the clock, so all we had to do it wack it in place of the pannel.. I was going to investigate this for my Futura as it also only has front power windows.. Cheers
_________________ 1996 EF Futura factory manual |
|||
| Top | |
|||
| ef_falcon_95 |
|
|||
|
I'll take the door trims off and check if there's a plug for the p/w motors .
I think what I'll do is cut the main p/w plug off, splice on the new plug with 12 pins. Then run the extra wires for the rear motors .
_________________ El XR6 Turbo |
|||
| Top | |
|||
| bry40l |
|
|||
|
i got told on boosted falcons that some el gli's came out with the wiring loom for front windows but mine didnt altho it has the wiring for a clock i just had to plug one in, but i have a trip computer so i have to add the wires, might just look at the fairmont loom for the trip computer and throw that in one day
the only way you can find out if yours has the wiring for the rear is have a look yourself maybe they snuck the rear wiring in your car 
_________________ BF XR6 |
|||
| Top | |
|||
| magna |
|
|||
|
{USERNAME} wrote: I'll take the door trims off and check if there's a plug for the p/w motors . I think what I'll do is cut the main p/w plug off, splice on the new plug with 12 pins. Then run the extra wires for the rear motors . don't cut the main plug off, get a small screw driver and push the pins out the back of the fairmont plug and add them to your existing plug. thats what I did. and do the same at the rear doors. the front wiring is the same but the rear windows add 4 or 5 extra wires. |
|||
| Top | |
|||
| ef_falcon_95 |
|
|||
|
I dont think I have had my rear trims off. I hope the plug Is there .
If it's not I can put the p/w loom on as they have a plug before the door. Then I'll just have to run 3 wires to the console .
_________________ El XR6 Turbo |
|||
| Top | |
|||
| ef_falcon_95 |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: I'll take the door trims off and check if there's a plug for the p/w motors . I think what I'll do is cut the main p/w plug off, splice on the new plug with 12 pins. Then run the extra wires for the rear motors . don't cut the main plug off, get a small screw driver and push the pins out the back of the fairmont plug and add them to your existing plug. thats what I did. and do the same at the rear doors. the front wiring is the same but the rear windows add 4 or 5 extra wires. Good idea . Thanks I'll do that . Will be much easier .
_________________ El XR6 Turbo |
|||
| Top | |
|||
| snap0964 |
|
|||
|
Inserting the extra pins is the most neatest way.
You don't pull the rear door trims to check - you pull the grommet in the body pillar where the rear door looms go into. Check the blue plug for the extra wires - base models are 3 wires, PW models are around 6 from memory on the body side plug.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 18 guests |
