|
| BOB*888 |
|
||
|
I want to see what is going on with my power window as it gets stuck and tilts when i wind up the window. i have removed all the screws for the front driver side door and was wondering how to remove the door trim to see inside. is there a certain way to remove it as it seems to be stuck for some reason.
Cheers for any help. 
_________________ Current: Ford Falcon EL 1998 Stock
|
||
| Top | |
||
| vertg0 |
|
|||
|
What type of Falcon is it? Is it a BA?
|
|||
| Top | |
|||
| BOB*888 |
|
||
|
EL falcon
_________________ Current: Ford Falcon EL 1998 Stock
|
||
| Top | |
||
| Sloxr6 |
|
|||
Age: 40 Posts: 862 Joined: 8th May 2005 Ride: BA Wagon Turbo, Ba Fairlane G220 Location: Colac |
It pops out from the top of the trim there are clips that hold it down sometimes there a bit of a b**ch to pop off once you have done that you need to pull the trim down so the lock pops above the trim and you have to unscrew it then the door trim should be free apart from a few plugs. Hope this helps if not do a search there is heaps of stuff on here about pulling them off.
_________________ Congo Green Ba Wagon With F6 6 Speed Manual Driveline. |
|||
| Top | |
|||
| daniel000 |
|
||
|
also u mite have to take off the plastic triangle cover thingy lol
with the trim lift it upwards an then u will see those black clips lift an then wiggle it an pull it out |
||
| Top | |
||
| Alex90 |
|
||
|
getting it back on is the worst bit haha. especially the rears. tis a b**ch altogether
_________________ 2007 BF Falcon MkII |
||
| Top | |
||
| Low EL |
|
||
Age: 44 Posts: 314 Joined: 5th Nov 2004 Ride: Fairlane Location: Cairns, Far North Queensland |
Just make sure you have the window down when you try to remove the trim.
_________________ EL GLI, White
|
||
| Top | |
||
| daniel000 |
|
||
|
whys that?
i didnt... |
||
| Top | |
||
| nicco |
|
|||
|
Alex90 wrote: getting it back on is the worst bit haha. especially the rears. tis a b**ch altogether dont be a little b**ch, its easy to get it back on!! harden up!!  Low EL wrote: Just make sure you have the window down when you try to remove the trim.
why? i've done mine with the window part way up before and it makes no difference |
|||
| Top | |
|||
| OZBMX |
|
|||
|
agreed, I didn't see any difference myself, my best guess is if the wrong piece comes up with the door trim you might scrath your window.
_________________ Signature removed by moderator.signature must not exceed 120x500 pixles |
|||
| Top | |
|||
| nicco |
|
|||
|
true i spose.
mine is normally down cause its too hot with it up!!
|
|||
| Top | |
|||
| Low EL |
|
||
Age: 44 Posts: 314 Joined: 5th Nov 2004 Ride: Fairlane Location: Cairns, Far North Queensland |
Just seems to make it easier to get the top of the trim away from the door.
_________________ EL GLI, White
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 85 guests |
