Is there a trick other than removing the screws to getting the door trim off. I need to get tot he door actuator so i can replace it.

nopre take out all the screws

hey mate, which door is it and if its a rear door, does it have rear power windows, let me know and I can tell you.

well, if its the front door your removing, look at the grab handle, you will notice you can lever out the centre plastic in it with a screwy, then undo the 2 screw underneath. Then remove the door handle by removing the screw under that screw cap. remove the screws at the top and bottom of the trim. Then, working your way around the edges, pull on the trim and the edges will start to pop out of their clips.

If your removing a rear door, do basically the same, only remove the cup holder screw and cupholder.

Make sure when you put it back, the door release cable is properly sitting inside the door release handle.