|
| NC 5ltr |
|
|||
|
gday guys
i want to take my window tint off the back of me 94 fairlane ,its the tint thats blury on the inside ,i think factory,anyways,is there a safe way to remove it without ripping the demister lines off? cheers
_________________ "Looking at cleavage is like looking at the sun. You don't stare at it. It's too risky. You get a sense of it and then you look away."
|
|||
| Top | |
|||
| NC 5ltr |
|
|||
|
someone must know something
_________________ "Looking at cleavage is like looking at the sun. You don't stare at it. It's too risky. You get a sense of it and then you look away."
|
|||
| Top | |
|||
| GTBob |
|
|||
|
Wont be factory if its blurry and to remove shouldn't hurt demist lines if done carefully. Try a little edge first. The people that install tinting have a special solvent to do this job, might pay to do a little research.
_________________ Rotten Old Revhead!!! XW GTHO + EF ex cop car (exractors 2.5 cat back zorst !6" Simmons K&N +airbox mods Lowered with Bilstein shocks+Whiteline Bars NEXT THING Swap HO for GTP or Ferrari! |
|||
| Top | |
|||
| twirqurky |
|
||
|
I thought the heater cables were on the outisde, thus presenting no problem?
|
||
| Top | |
||
| uglybob |
|
|||
|
{USERNAME} wrote: I thought the heater cables were on the outisde, thus presenting no problem?
nope - on the inside dylan! i know there are repair kits you can buy i *think* if you do f**k up when you're removing it... 
_________________ R.I.P. Scotty |
|||
| Top | |
|||
| Cosham |
|
|||
|
please excuse my ignorance but do tints go on the inside or outside?
_________________ Who needs an XR6 when you've got a corolla wagon |
|||
| Top | |
|||
| NC 5ltr |
|
|||
|
{USERNAME} wrote: Wont be factory if its blurry and to remove shouldn't hurt demist lines if done carefully. Try a little edge first. The people that install tinting have a special solvent to do this job, might pay to do a little research.
yeah thats what im doin tints on the inside 
i might just get all the tint replaced i got my old cardone and cost around 240 how much would it cost to take org tint off then put new tint on ? cheers
_________________ "Looking at cleavage is like looking at the sun. You don't stare at it. It's too risky. You get a sense of it and then you look away."
|
|||
| Top | |
|||
| Punnisher_42 |
|
|||
|
based on my uncles tinting experiance: There are expensive methods of removing tint using specialised equipment
I have talked to me about retinting my rear window and it is a lot of work. most of the solvents do not do the job - still have to scrape the glue from the grass and scour the window damaging the demister lines. Basically, the only way to do a decent job at tint removal is to scrape it off, scratching the demister lines irrepairably. Most tinters simply won't touch any of it.
_________________ Regards, |
|||
| Top | |
|||
| Video_Guy |
|
||
|
I got a quote from Solartint Taren Point to remove and replace the after market tinted windows all round
The quote was $320 for new tint, with lifetime guarantee against fading and bubbles, and $50 to remove the existing film - thought it was a reasonable amount to pay to have it removed - saving a lot of hassle. The guy had no problems with the removal issue - says it gets done all the time Check out one of your local tint places - you may be better off getting them to do it, make sure they guarantee the demister PS - hoping to get enough dollars saved to get it done in a week or two
_________________ Video_Guy
|
||
| Top | |
||
| kman |
|
|||
|
tint-a-car remove tint for $50, good price and saves alot of hassle. i got my tint done for $250 life time warranty about 15% darker than legal i think
_________________ mullets are cool.... they promote the quintessential iconic figure of an australian
|
|||
| Top | |
|||
| twirqurky |
|
||
|
{USERNAME} wrote: please excuse my ignorance but do tints go on the inside or outside?
Inside. My mate removed the tinit in his EF simply by pulling it off...stunk but it worked. |
||
| Top | |
||
| fuzion |
|
||
|
If anyones interesting in Sydney or South Coast tint for falcons for under $240 with receipt and 20% if your interested too.
To remove your tint from the rear, peal it as you have a heatgun on the edge outside of the glass (close obviously) slowly pealing it off. If it leaves glue, get some coke and petrol (yes im serious) and spray it on, let it set and get a razor blade (SHARP) and scrap it all off.. thats how u do it, but otherwise thye have chems to take it off (spray on chem) but tint mate told me thats how they used to do it but still use a heatgun just no coke lol |
||
| Top | |
||
| 95fairmont |
|
||
|
I removed the tint on my EF a few months back, and yes a few here in Fordmods suggested using a heat gun. Problem was, I didn't have access to one. For the rear window, I turned the demister on for several minutes to heat up, exposed the car under the sun for a few minutes...then alas!!! rear tint came off almost in one piece. The remaining adhesive on the window I took out using glass cleaner solution and a soft foam so as not to damage the demister lines.
A sweaty job but sure loved the car without its old factory tint which were turning purple. |
||
| Top | |
||
| billysxr8 |
|
||
|
My XR8 had the same problem when I bought it. Took it to Premier Tint and they removed the old film from the rear window and re-tinted for $100.
_________________ 1998 EL XR8 (185kw Series 2), Factory bodykit, EL GT rims, 2.5" Redback exhaust, King Superlows with Monroe GT shocks. |
||
| Top | |
||
| Ben_Daui |
|
|||
|
I did on the family EL FUTURA wagon & peeled it off & used metho to get all off the glue off & the demister still works sweet
_________________ MEMBER 1390 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 26 guests |
