Fordmods Logo

Removing the Carpet from an EL Falcon Sedan 

 

Page 1 of 1 [ 7 posts ] 

 
 Post subject: Removing the Carpet from an EL Falcon Sedan
Posted: Fri Mar 09, 2012 12:29 pm 
Fordmods Newbie
Offline

Age: 43

Posts: 13

Joined: 12th Dec 2006

Ride: Falcon EL

Location: Condobolin
NSW, Australia

Hi All, just wondering if anyone can offer advice or tips on completely removing the moulded carpet from an EL. Mine got wet when i had to drive through some recent flood waters, the carpet itself has dried but the underlay is still very wet. Removing the rear bench seat and front seats is pretty easy, but I’m not sure how far up under the console the carpet goes.
Top
 Profile  
 
 
 Post subject: Re: Removing the Carpet from an EL Falcon Sedan
Posted: Fri Mar 09, 2012 12:44 pm 
Smokin em up
Offline
User avatar

Age: 32

Posts: 243

Joined: 4th Jun 2011

Gallery: 6 images

Ride: ef xr6

Location: melbourne
VIC, Australia

Naa easy bro it take out the center and radio and the gauge plastics and u should be tight from there u will have to move wires feom the hand brake and lights if u have them installed

 

_________________

EF XR6
K&N PANEL FILTER ulah, CAM, J3 CHIP, 128.3 RWKW, F6 TYPHOON RIMS, FULL TAN AND BLACK INTERIOR, CUSTOM BOOT INSTALL IN PROGRESS..
:)

Top
 Profile  
 
 
 Post subject: Re: Removing the Carpet from an EL Falcon Sedan
Posted: Fri Mar 09, 2012 12:56 pm 
Fordmods Newbie
Offline

Age: 43

Posts: 13

Joined: 12th Dec 2006

Ride: Falcon EL

Location: Condobolin
NSW, Australia

Thanks for the advice mate, is it very difficult to remove the plastics? I've had the radio one off before but never the centre or guage ones. Do they pry off, unclip or unscrew?
Top
 Profile  
 
 
 Post subject: Re: Removing the Carpet from an EL Falcon Sedan
Posted: Fri Mar 09, 2012 1:22 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 3399

Joined: 10th Jan 2010

Gallery: 8 images

Ride: EL XR6

Location: albion park, wollongong
NSW, Australia

You don't need to remove the dash face .
To remove centre console there are 2 screws on either side underneath radio surround, 2 screws in the centre console it self , then 2 screws under the radio surround , lift up the mat in front of gear stick .
Then lift the Back up first and pull out , it's a bit fiddly ,then there are 2 screws holding down the white thing for the air con .

 

_________________

El XR6 Turbo
Dark Agents,Sunroof, bilstein shocks, 6000k HIDS, 329 mm slotted rotors, twin pot calipers , Climate Control, GarrettT04 turbo,log manifold, crow turbo cam, microtech lt10c, 42lb injectors , 044, surge tank , T56 , rebuilt bottom end , alloy plenum .

Aiming for 300 rwkw

Top
 Profile  
 
 
 Post subject: Re: Removing the Carpet from an EL Falcon Sedan
Posted: Fri Mar 09, 2012 5:52 pm 
Fordmods Newbie
Offline

Age: 43

Posts: 13

Joined: 12th Dec 2006

Ride: Falcon EL

Location: Condobolin
NSW, Australia

Thanks Mate, you make it sound so easy!!! Im guessing i will need to take the handle off the top of the Auto Trans selector in order to lift the console up completley??
Top
 Profile  
 
 
 Post subject: Re: Removing the Carpet from an EL Falcon Sedan
Posted: Fri Mar 09, 2012 5:54 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 3399

Joined: 10th Jan 2010

Gallery: 8 images

Ride: EL XR6

Location: albion park, wollongong
NSW, Australia

Yes u will . Get a 12" shifter and undo the nut underneath then screw off t-bar , make sure the rod goes in the same way u took it out

 

_________________

El XR6 Turbo
Dark Agents,Sunroof, bilstein shocks, 6000k HIDS, 329 mm slotted rotors, twin pot calipers , Climate Control, GarrettT04 turbo,log manifold, crow turbo cam, microtech lt10c, 42lb injectors , 044, surge tank , T56 , rebuilt bottom end , alloy plenum .

Aiming for 300 rwkw

Top
 Profile  
 
 
 Post subject: Re: Removing the Carpet from an EL Falcon Sedan
Posted: Sun Mar 11, 2012 2:46 pm 
Fordmods Newbie
Offline

Age: 43

Posts: 13

Joined: 12th Dec 2006

Ride: Falcon EL

Location: Condobolin
NSW, Australia

Thanks for all the advice guys, I had no trouble once I got started, just time consuming really. I took lots of photos along the way, so if anyone ever wants detailed pics of where screws are, how panels fit together and where wires run just let me know. For a 14 year old car she was amazingly clean underneath the carpet, she will just be half naked till it drys out properly lol.
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 7 posts ] 

Who is online

Users browsing this forum: No registered users and 41 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Tue Dec 24, 2024 6:19 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names