|
| Scynte |
|
||
|
Hey all, long time reader first time poster.
The driver side rear window motor has given out on me. Have tried the usual suspects, switches, checked wiring, fuses, etc. So currently in the process of removing them and I have run into a snag. I figured they were just rivots but I have never seen this type of backing on one before and have no idea how to remove it. Front:  Back:  Is this actually a rivot or something else and how the hell do I remove it? Thanks in advance. |
||
| Top | |
||
| misskitten9871 |
|
||
Age: 30 Posts: 201 Joined: 24th Aug 2012 Ride: 1987 telstar/2004 BA XR6 5spd Location: Newcastle |
i just did mine, you bash out the center with a center punch or anything small enough ( i used a small phillips head ) then you drill the rest out
 ..to put the new one i i welded a 10mm nut onto the new mount and used 10mm bolt to bolt it back on the door. i used 16mm long ones
|
||
| Top | |
||
| Scynte |
|
||
|
Weird, I tried that before and it doesn't seem to do anything, did it take much effort to get the center out with the punch? Mind doesn't seem to be moving at all..
|
||
| Top | |
||
| misskitten9871 |
|
||
Age: 30 Posts: 201 Joined: 24th Aug 2012 Ride: 1987 telstar/2004 BA XR6 5spd Location: Newcastle |
took a few hard hits with the hammer but got there eventually
|
||
| Top | |
||
| bry40l |
|
|||
|
Scynte wrote: Weird, I tried that before and it doesn't seem to do anything, did it take much effort to get the center out with the punch? Mind doesn't seem to be moving at all.. ive had some tap out simply with the tap of the hammer and ive had some not wanna move at all so ive had to grind the front off them with a dremel
_________________ BF XR6 |
|||
| Top | |
|||
| Scynte |
|
||
|
Well I got them all out, seems I was just being a bit soft with them, only to find out the motors I ordered where for every other door, including two for the back passenger side..
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 25 guests |
