|
| ef_paddy |
|
||
|
Hey guys,
I took the door trim off mmy ef mont ghia over the weekend to sperate the top part of the trim (where the woodgrain is on) from the bottom. I removed all the gold clips holding it together only to find the speaker appears to be holding it together, my cousin reckons it's plastic welded together so i wanted to check if this was the case and if any of you knew how to separate it? Cheers, Pat
_________________ "You only need 2 tools, WD-40 and duct tape. If it doesnt move and it should, use WD-40. If it moves and it shouldnt, use the duct tape!" |
||
| Top | |
||
| EFFalcon |
|
|||
|
the speaker grill has plastic tabs that come through the trim, you can use some pliers to just cut the top of the plastic off.
There is also a decent sized rivette that's holding it in too.
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| ef_paddy |
|
||
|
Ok are they tabs? Mine look like melted plastic? Once i get the rivet out and the tabs off how would i re-attach it? Maybe i should of just gotten a whole trim haha
_________________ "You only need 2 tools, WD-40 and duct tape. If it doesnt move and it should, use WD-40. If it moves and it shouldnt, use the duct tape!" |
||
| Top | |
||
| EFFalcon |
|
|||
|
tabs/melted plastic. we're talking about the same thing.
you could glue it back in, thats what i've done in the past.
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 28 guests |
