|
| ef_falcon_95 |
|
|||
|
Hey all
I got a starter button for my el but not sure how to wire it in, I have an idea. I have a workshop manual which isn't much help. Do I just find the ignition wire and tap the switch into it do I need a relay ? If anyone has done this to their ef/el did they come across any problems ? Cheers
_________________ El XR6 Turbo |
|||
| Top | |
|||
| jughead302 |
|
||
Age: 34 Posts: 326 Joined: 3rd Nov 2009 Ride: AUII XR8 Pursuit & EF XR6 Location: Albion Park |
Why a push starter button? If its security then just go a kill switch tucked away but easy enough to get to. If you wanted a push button start car you should of bought a Prius or something alike. lol
_________________ - 1994 EF XR6, Auto, EL XR wheels. Clean and close to original ( Missus' Kiddie Chariot ) |
||
| Top | |
||
| ef_falcon_95 |
|
|||
|
Well I was at Jaycar getting speaker wire and I seen this push button start. Then I was thinking it would be pretty cool looking lol
Not for security. Just looks. Negative comments aside I need info on this guys
_________________ El XR6 Turbo |
|||
| Top | |
|||
| phongus |
|
|||
|
jughead302 wrote: Why a push starter button? If its security then just go a kill switch tucked away but easy enough to get to. If you wanted a push button start car you should of bought a Prius or something alike. lol Nothing wrong with a start button...might be annoying me think. Can act like a kill switch depending if it's stealth or hidden. If it's stupidly obvious then forget about the kill switch option. If it's just for show, I guess it would be a nuisance after a while and the novelty wears off.
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| ef_falcon_95 |
|
|||
|
I still want to be able to start the car with the key and button.
_________________ El XR6 Turbo |
|||
| Top | |
|||
| ef_falcon_95 |
|
|||
|
Someone must know how I can install a starter button ?
_________________ El XR6 Turbo |
|||
| Top | |
|||
| go_fish |
|
||
|
do you want the key in the barrel and tuned to ignition then press starter button?
You can also wire it in so that when the car is running and you press starter button, it wont throw the starter. |
||
| Top | |
||
| ef_falcon_95 |
|
|||
|
I figured it out and wired it up and it works, just gotta tidy it up a bit and add fuses ,
I used a test light and found out which wire has power when the motor is cranked. It's the black and Red wire, then I spliced into that wire and the wire spliced off it I probed the back of the plug and when it touched the green wire it kicked over. So the Red/black wire is connected with a button switch in the middle. I put my key into IGN then push the button and she starts. Tomorrow I'll tidy it up with solder and add fuses just incase, I'll put up pics also for anyone interested in this mod, Does anyone know what amp fuse the ignition uses ?
_________________ El XR6 Turbo |
|||
| Top | |
|||
| TimmyA |
|
|||
|
phongus wrote: jughead302 wrote: Why a push starter button? If its security then just go a kill switch tucked away but easy enough to get to. If you wanted a push button start car you should of bought a Prius or something alike. lol Nothing wrong with a start button...might be annoying me think. Can act like a kill switch depending if it's stealth or hidden. If it's stupidly obvious then forget about the kill switch option. If it's just for show, I guess it would be a nuisance after a while and the novelty wears off. The novelty would wear off... Esp when you have both the key and the button to start like the OP wants... Why you you turn the key to on... stop and reach with the other hand to press a start button... You talk to anyone who owns a FPV where the car does not start with the key... Its more a PITA than a novelty... All that aside... Your workshop manual should be a world of help... IIRC the jaycar switch is rated at 50amps (bought one for a mates race car)... So should have no issues pulling the starter relay, which I jguess pulles in the starter solenoid which powers the motor... Double check that in your book... If that as all the start position powers you would only have to go from common to start... You will need a relay which needs to be powered from the "on" position on the barrel so that the button is in-operative with the key removed... Without it, pressing the button will make the motor crank (wont start though) Other option is... pick up from "on" contact on the barrel and bridge button across to "start" terminal... This alleviates the relay... button only has power when key is "on" this way... Shouldn't require a relay... As long as the switch is rated at whatever load it is switching... Second issue (like go_fish stated)... is no doubt your doing it to show it off... so you'll want it to be disactivated when the engine is going... (otherwise your best mate may see the funny side of throwing you starter in while you're driving...) This will require a relay and you'll need to pick up of the alt light wire out of the alternator... use it to trigger a small relay (not sure how much current you can actually draw off this wire) and then use that relay to drive a std 40amp relay which will cut the power from the "on" wire to your switch... other option here is to use a transistor... the alt light wire drives a transistor which switches a relay (less clutter)... that makes it idiot proof... while you're going you may as well hook the light in the switch up off the alt light wire... Hence when the car is stopped the button illuminates... While running it isn't illuminated... Food for thought... Cheers, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| ef_falcon_95 |
|
|||
|
Mine doesn't start if I push the button and the key is removed, is the set up I have a good way or do I need a relay ?
_________________ El XR6 Turbo |
|||
| Top | |
|||
| TimmyA |
|
|||
|
while the car is running you will be able to engage the starter... as you can with the key... the thing a passenger cannot reach your key... it is easy however for them to press your starter button to see the "what if" factor of it all...
its not bad... but if someone hits it you may find teeth missing from various places... for a fuse rating... use your workshop manual... find the starting section... trace it back to see which fuse it runs off... if you picked up off ignition wires with the same gauge wire that the factory ones are you should not need to put another fuse in it... All you have done is mimicked the start position in the key with a press button in the dash... One thing I was interested in was the "key to start" thing in modern cars... Where you'd hit the key and release it and it cranks until the car fires... good in theory... but undecided in practise... be fine in an auto... but in a manual with no inhibitor switch... if you leave it in gear and hit the key she will take off... so hence I have never ventured into it... If I was to do it the saftey thing would be in the clutch pedal... if your doing that... may as just hold down the key til it starts... Cheers, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| ef_falcon_95 |
|
|||
|
I am using the same gauge wire as the ignition is ran off so I won't need a fuse then.I havnt really thought much into the safety side of it. I'll just have to tell passengers not to press the big red button lol
By the time I stuff around with safety switches and what not it's not worth having a push button start. But I'll see how it goes Thanks for your help
_________________ El XR6 Turbo |
|||
| Top | |
|||
| Burningrubber92 |
|
||
|
Hey mate do you have the photos of the wiring you did?
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 31 guests |
