|
| del_futura |
|
|||
|
Hey there,
I just got me a momo steering wheel the other day and was following the tech doco on how to change steering wheels on ef/el. Now all is well except for the little airbag plug. I can't manage to clip it back in at all. Anybody know if there's any technique to it? Thanks!! -del |
|||
| Top | |
|||
| gryph |
|
|||
|
Umm u just look @ it make sure the clip is facing the right way and push it in????? Its pretty damn easy if your having trouble youd better post pics up cuz u mighta disconnected something different eh......
|
|||
| Top | |
|||
| del_futura |
|
|||
|
Yes pretty sure it only goes in one way, and its not going in. Will try get some pics up soon.
|
|||
| Top | |
|||
| Private9 |
|
|||
|
del_futura wrote: Yes pretty sure it only goes in one way, and its not going in. Will try get some pics up soon.
It's been a few weeks since I had mine off, but are the pins inside the plug bent or anything? You are pushing it on hard enough? |
|||
| Top | |
|||
| gryph |
|
|||
|
Shouldnt need to push on it hard at all, If your pushin hard theres something wrong and u r probably bending pins. Believe me ive had my s/wheel off about 30 times in the last 6 months....
|
|||
| Top | |
|||
| del_futura |
|
|||
|
Yep my mate who first attempted to put the plug in somehow bent the prongs. Its all in now thanks guys.
BUT! Now the airbag light won't turn off. Any ideas?? |
|||
| Top | |
|||
| RedRoo |
|
|||
Age: 55 Posts: 1883 Joined: 22nd Apr 2005 Ride: 94 ED Fairmont, MY97 LE WRX Location: Seymour |
check your reverse light fuse mate,
if it's blown or has been removed your airbag light will be on. cheers paul |
|||
| Top | |
|||
| falcon hell |
|
||
|
lmao reverse light fuse does it really cause the airbag light to come on? just like the gemini and the park light power wire
_________________ and on the eighth day God created the Falcon |
||
| Top | |
||
| del_futura |
|
|||
|
Thanks for the help so far guys,
Ok checked the reverse light fuse, and there was a 15A fuse in there, i thought it was meant to be a 10A fuse. So i changed it to a 10A fuse and the aribag light is flashing like this: Flash-Flash-Pause-Flash-Flash-Flash-Flash-Flash And this keeps on repeating while car is on and stationery. |
|||
| Top | |
|||
| joshannon.7 |
|
||
Age: 42 Posts: 296 Joined: 16th Oct 2006 Ride: 94 EF (OPT20), TF Cortina Ghia Location: Bendigo |
mine was doing that when i picked it up from the dealer. the sent it into the auto elec and he said it is a common problem after a knock in the front end or if some wiring has been moved.
_________________ "Look I found tape, I'm a mechanic now!!!" Mike Teutul |
||
| Top | |
||
| Private9 |
|
|||
|
del_futura wrote: Thanks for the help so far guys,
Ok checked the reverse light fuse, and there was a 15A fuse in there, i thought it was meant to be a 10A fuse. So i changed it to a 10A fuse and the aribag light is flashing like this: Flash-Flash-Pause-Flash-Flash-Flash-Flash-Flash And this keeps on repeating while car is on and stationery. This sometimes happens after disconnecting the airbag. You basically need to reset the code for the airbag. A guy by the name of JC on fordforums.com.au has documented this, and it's a fairly quick fix and will clear your codes. |
|||
| Top | |
|||
| del_futura |
|
|||
|
Ok I had a search on fordforums.com.au and i couldn't find it.
Anybody have the link or know what i need to do to fix this? |
|||
| Top | |
|||
| horis |
|
|||
|
down the bottom of this tech doco tells you how to remove the codes using a test light ect
http://www.fordmods.com/forums/documents.php?doc=3
_________________ 95 ef montfor sale pm for info, 88 hilux mud truck |
|||
| Top | |
|||
| del_futura |
|
|||
|
Thanks for that horis,
Ok in the tech doco it says this: Code Clearing # 1) Switch the Ignition On # 2) Allow the Code to be Displayed. # 3) Apply a Short Circuit to the Airbag Memory Clear Pin of the Diagnostic Connector to Ground (See above Picture for further details). # 4) The Code will be cleared after 5 Beeps have sounded. Repeat the Above untill all the required codes have been Cleared. Now in step 3 it says apply a short circuit to the airbag memory clear to ground. What exactly does this mean? Do i need to connect a wire from that pin to the body of the car? Sorry for the n00b question, -del |
|||
| Top | |
|||
| del_futura |
|
|||
|
Ok I followed the tech doco on how to clear the codes.
I didn't get any of the 5 beeps. If anyone is willing to help me I will drive to you because I'm sick of this airbag light in my face all the time!!! Thanks!! -del |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 43 guests |
