|
| phongus |
|
|||
|
hey guys and girls
my friend bought a tacho and installed it in his car (TX3). the tacho worked for a while but then suddenly the needle stopped moving but the shift light still worked. could the induction coil that makes the needle move not have power or has it blown? cause i dunno if its possible to burn an Induction coil. hopefully someone can enlighten me with this problem. thanks phong
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| chunkz |
|
|||
|
does your mate have an auto?
and neons? and milo tin as an exhaust 
_________________
|
|||
| Top | |
|||
| Ryan0001 |
|
|||
|
haha and fluffy dice...
nah seriously, check all connections and make sure everythings snug and watertight. if all is well, try changing tachos, it might have a dodgey mechanisim inside. good luck with it ryan |
|||
| Top | |
|||
| Mitch_ |
|
|||
Posts: 6168 Joined: 5th Nov 2004 |
{USERNAME} wrote: does your mate have an auto?
and neons? and milo tin as an exhaust can ure mate put wheels on his car the rite way? if is still got warranty take it back to get fixed
_________________
|
|||
| Top | |
|||
| chunkz |
|
|||
|
yes, so can i...
_________________
|
|||
| Top | |
|||
| Mitch_ |
|
|||
Posts: 6168 Joined: 5th Nov 2004 |
eya but u cant do it on ure first attempt
_________________
|
|||
| Top | |
|||
| chunkz |
|
|||
|
well yes i did
just not on my... 6th attempt when it was dark, cold and i was frustrated!!!(i changed two couple weeks before hand)
_________________
|
|||
| Top | |
|||
| phongus |
|
|||
|
lol
nah its not auto, its manual and it was working and then died. i dun think he has any guarantee. but thanks anyways everyone. ill see what i cna do with the electronics. hf
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| stuzzy |
|
|||
|
my mate who hase a vl had the same problem i think 4 memory but it was only a s**t cheap gauge
|
|||
| Top | |
|||
| phongus |
|
|||
|
This tacho has 5 wires. it has a black (negative im guessing), a green, yellow and 2 reds
i know what the black one is and one of the reds. but what is the green, yellow and other red wire on the tacho? im trying to test if the needles works through the wires, it seems to work when i put a low voltage battery to the terminals for the needle. but not sure if any of the small components are stuffed? if anyone has any idea what those wires are for can u please tell me. thanks
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| Ryan0001 |
|
|||
|
{USERNAME} wrote: it seems to work when i put a low voltage battery to the terminals for the needle.
maybe the car tacho signal is a pulsed frequency instead of variable voltage? by what you say above, the tacho needs variable voltage input to function correctly. if it is a pulsed tacho output in the car, you'll need a different tacho. and the wire pin-outs should be in the manual that came with it? |
|||
| Top | |
|||
| Mr Man |
|
|||
|
This tacho has 5 wires. it has a black (negative im guessing), a green, yellow and 2 reds
just by goin on the tacho we put in a mates car, the green was to pick up engine rpm, black was negative, one red went to accessories and the other to constant 12v... it only had 4 wires i think 
i cant remember for sure, it was a while ago... did it come with installation instructions??
_________________ 300+rwkw HeadsexTuned XR6 Turbo Ute *NOW SOLD |
|||
| Top | |
|||
| phongus |
|
|||
|
nah this is a mates tacho and he didn't give me the instructions. hi installed it and it worked for a while but then it just died, like something fried and stopped the needle from working.
i opened it and suspected a faulty transistor and that might need replacing but im not sure. my friend might just ditch this and get a new one. but yeah i found out what the wires were for. 2 were for shift lights and the other were for accesories, negative and green was signal. but when i tested it in my car didn't work either but the lights. so i guess some electronic component is fried.
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| Mr Man |
|
|||
|
ah ok, the one we installed had an internal shift light, was only a 3 3/4" tacho though... now that u mention in for the 5" ones they have a yellow wire for the external shift light, well the one i saw did anyways...
_________________ 300+rwkw HeadsexTuned XR6 Turbo Ute *NOW SOLD |
|||
| Top | |
|||
| phongus |
|
|||
|
well i couldn't fix it i guess it needed some more electronic attention. but ah wells he'll have to buy another one. thanks everyone
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Majestic-12 [Bot] and 11 guests |
*