|
| ef_paddy |
|
||
|
Hi guys like the title says I wanted to know if the (top piece i.e where the wood grain sits on the fairmont) is the same/interchangable on the faclon, xr6, fairmont etc apart from looks?
Cheers, Pat
_________________ "You only need 2 tools, WD-40 and duct tape. If it doesnt move and it should, use WD-40. If it moves and it shouldnt, use the duct tape!" |
||
| Top | |
||
| XRfairmont67 |
|
|||
|
yeah the trim tops will interchange
|
|||
| Top | |
|||
| asizzy |
|
||
|
elf100capri wrote: yeah the trim tops will interchange
+1
_________________ AsIzZy |
||
| Top | |
||
| BenJ |
|
||
|
Just be aware that there are three different shades of Grey.
The EF has a dark shade, the Early EL has a lighter shade, and the late EL has a shade almost as dark as the EF but not quite. BenJ
_________________ BenJ's EB T5 DOHC Ghia Wagon - Current Ride |
||
| Top | |
||
| snap0964 |
|
|||
|
IIRC the front door speaker grilles have a rivet through the top dark grey strip, so remove it before you unclip it from the main door trim.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| ef_paddy |
|
||
|
Cheers guys, well i'll be on the hunt fo ef door trims now
_________________ "You only need 2 tools, WD-40 and duct tape. If it doesnt move and it should, use WD-40. If it moves and it shouldnt, use the duct tape!" |
||
| Top | |
||
| frankieh |
|
|||
|
I just did this myself.. noticed that one of my ghia trims had marks and a small hole near the lock knob... was the same grey as the factory trims so I drilled out the rivit under the speaker grill, removed all the clips on the back and swapped them over.. then drilled some holes for the wood insert and ghia badge and it looks perfect..
good stuff and very handy that ford made them two piece. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 71 guests |
