|
| chunkz |
|
|||
|
okay quick question
what if i plugged my trip computer into my old clock plug (without adding any wires) will it do anything at all? short cercuit it? just show time?
_________________
Last edited by chunkz on Sat Aug 20, 2005 4:15 pm, edited 1 time in total. |
|||
| Top | |
|||
| twase |
|
|||
|
{USERNAME} wrote: okay quick question Should be OK, but it won't light up, it needs the data connection from the cluster to wake it up.
what if i plugged my trip computer into my old clock plug (without adding any wires) will it do anything at all? short cercuit it? just show time? Cheers TW.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| twirqurky |
|
||
|
It wont do anything. As mentioned it needs to wire to the cluster to work properly.
|
||
| Top | |
||
| Waggin |
|
|||
|
The plugs are different for starters.
But yeh, you MUST run the data line from the Trip computer to the instrument cluster to get it working. If it doesnt get a signal, it wont even show the time (unless you press the buttons on the T/C)
_________________ WAG363: AUII LTD Supercharged 363 Dart Stroker [{DESCRIPTION}] |
|||
| Top | |
|||
| GTBob |
|
|||
|
The plugs are the same ONLY the amount of wires is different
 
_________________ Rotten Old Revhead!!! XW GTHO + EF ex cop car (exractors 2.5 cat back zorst !6" Simmons K&N +airbox mods Lowered with Bilstein shocks+Whiteline Bars NEXT THING Swap HO for GTP or Ferrari! |
|||
| Top | |
|||
| mreb |
|
|||
|
the plugs are different changed the clock to a trip computer on my old car the plugs bigger .
|
|||
| Top | |
|||
| chunkz |
|
|||
|
wtf you serious!!
in doco all it says is add wires!!!
_________________
|
|||
| Top | |
|||
| falconea |
|
||
|
Plugs are the same, but u need extra wires and the position of some wires are different.
Trip comp wiring pin 1 data i/o 2 not used 3 batt power 4 gnd 5 LCD dimmer sig 6 park lamp sig 7 park lamp dimmer sig 8 gnd Clock wiring Pin 1 not used 2 ign power 3 battery power 4 gnd 5 LCD dimmer sig 6not used 7 not used 8 gnd Hope this helps cheers
_________________ Drive safe, arrive alive
|
||
| Top | |
||
| chunkz |
|
|||
|
cheers falcon ea, thats what i thoguht
but when waggin and the other bloke says different plugs, this is going to be a bit of a fooker
_________________
|
|||
| Top | |
|||
| mreb |
|
|||
|
i have one of each in my garage the trip computer plug is bigger than the clock just went and checked ,that had me puzzled .
|
|||
| Top | |
|||
| falconea |
|
||
|
Acording to the FORD manual it should be an 8 pin plug for both, just different wiring.
_________________ Drive safe, arrive alive
|
||
| Top | |
||
| ch0c0 |
|
||
|
depends on the model
earlier eseries the plugs were the same later they were different or maybe the other way around.
_________________ BOOSTED |
||
| Top | |
||
| twirqurky |
|
||
|
Ok this is to end all the confusion.
Based on EF/EL The clock and trip computer plug are able to be used on each other, ie if you have a clock you can you taht plug to operate a trip computer. To get the trip computer working you MUST run a wire from the cluster to that plug. If this wire is not installed hte trip computer WILL NOT WORK. The plugs are the same size. I have a NF Fairlane Trip Computer in my EF Futura, I put it in myself, I know it works. |
||
| Top | |
||
| mreb |
|
|||
|
sorry chunks i screwed up i was thinking ea-ed, yeh there right ef-el are the same .
|
|||
| Top | |
|||
| chunkz |
|
|||
|
relief
thanks twirqy, seems you are good for something 
im still yet to find my cause
_________________
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 31 guests |
