|
| DRHEMI |
|
|||
|
Depends on how wide the tyres are........and the offset of the rims
I have spoken with 4 people with 19"s and all have used 245's on the front and they have all scrubbed so they got 235's This is after ppl say yeah 245's on 19"s dont scrub.............. I have 235/35/19"s on mine and they dont scrub 
Short Shocks and Super Lows Front and Ultra Lows Rear PS my 235's on my 17"s scrubbed before i fitted my 19"s but easy fix was that i rolled the gaurds with a baseball bat
_________________ PROEF 13.46 @ 105.78mph - 1994 Ford Fairmont EF NA 6cyl Man 3.9 diff Sedan |
|||
| Top | |
|||
| twr7cx |
|
|||
|
Might look different when they're on front and back, but from that photo it makes the car look too high and the wheels look too big.
|
|||
| Top | |
|||
| FORDom |
|
||
|
They're 245/45/19's..can i expect them to hit the guards?
i should note that i will be using hub adapters. would if be alrite just to roll the front guards, or will i need to run a different size tyre? |
||
| Top | |
||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
FORDom wrote: They're 245/45/19's..can i expect them to hit the guards?
i should note that i will be using hub adapters. would if be alrite just to roll the front guards, or will i need to run a different size tyre? are they AU offset? you will need 30mm spacers to clear upper ball joint just roll the guards. you'll be fine
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| Dumpsta |
|
|||
|
Mate, I love em! What wheel are they? They look more like 20's then 19's maybe because of the smalled front wheel. Ive got 18's on my el and I reckon they look too small from too many angles, I came so close to buying a set of 20's a couple of months ago. I wouldnt hesitate to go 19's or 20's except the fact that mines a work car. I think on 20's you need to run a /30 tyre to fit under the ball joint, not sure bout 19's but Im running /40's on my 18's.
|
|||
| Top | |
|||
| FORDom |
|
||
|
they're advanti photons..
come in 17, 18 and 19's..good luck trying to find them though..they are an old rim and not many places have them.. i found a set in menai sydney for $1995 with tyres (19's).. |
||
| Top | |
||
| FORDom |
|
||
|
WILDEB wrote: FORDom wrote: They're 245/45/19's..can i expect them to hit the guards? i should note that i will be using hub adapters. would if be alrite just to roll the front guards, or will i need to run a different size tyre? are they AU offset? you will need 30mm spacers to clear upper ball joint just roll the guards. you'll be fine 30mm spacers or hub adapters? Ill be using a set of hub adapters, are there different sizes ? |
||
| Top | |
||
| Dumpsta |
|
|||
|
Thanks mate, I thought they were Koya Alessi's at first glance, very similar. And yep you can get hub adapters in various sizes.. Correct me someone if Im wrong but its 36mm between Pre Au and Au+?
|
|||
| Top | |
|||
| FORDom |
|
||
|
So if i was to by these ones here, would they make my rims fit?
http://cgi.ebay.com.au/Wheel-Billet-Ada ... 240%3A1318 he also has a set of 25mm ones, don't know which to get.. |
||
| Top | |
||
| Dumpsta |
|
|||
|
Best bet would be to measure up the wheels
|
|||
| Top | |
|||
| SIC_XH |
|
|||
|
do it
looks good.
_________________ XR8 UTE: Low && Loud |
|||
| Top | |
|||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
FORDom wrote: WILDEB wrote: FORDom wrote: They're 245/45/19's..can i expect them to hit the guards? i should note that i will be using hub adapters. would if be alrite just to roll the front guards, or will i need to run a different size tyre? are they AU offset? you will need 30mm spacers to clear upper ball joint just roll the guards. you'll be fine 30mm spacers or hub adapters? Ill be using a set of hub adapters, are there different sizes ? my bad i meant hub adapters. i had 245/35 tyres though.
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| Dumpsta |
|
|||
|
The other thing to be aware of is, Ive heard that you have to grind your studs to shorten them so they dont protrude past the hub adapter, not sure if this has to be done in all cases.
|
|||
| Top | |
|||
| wild_ef |
|
|||
|
they'l look good. i dont think 19's are to big at all.
18 and 19's look the best on e series.
_________________ BA Fairmont Ghia |
|||
| Top | |
|||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
Dumpsta wrote: The other thing to be aware of is, Ive heard that you have to grind your studs to shorten them so they dont protrude past the hub adapter, not sure if this has to be done in all cases.
since when?
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 85 guests |
