|
| Grumblexr6 |
|
||
|
Would any1 know if a BA XR cluster fit into an XH at all or what can you tell me im guessing at least you would have to change all the connectors but if there anything else i should know do tell Thanx
|
||
| Top | |
||
| Interceptor |
|
||
|
define "fit"
1:a straight bolt in job with no more work than changing the plugs? hahaha keep dreaming 2: a LOT of custom work to get it to fit, then changing all the plugs? hahaha if you're lucky 3: an absoloute s**t of custom work equivalent to transplanting the entire drivers side of a BA dash, as well as the ICC and all the electronic s**t most probably.....
_________________ Banned |
||
| Top | |
||
| Grumblexr6 |
|
||
|
yea thought be to much trouble but was a thought, Thanx
|
||
| Top | |
||
| Happy |
|
|||
|
Interceptor wrote: define "fit"
1:a straight bolt in job with no more work than changing the plugs? hahaha keep dreaming 2: a LOT of custom work to get it to fit, then changing all the plugs? hahaha if you're lucky 3: an absoloute s**t of custom work equivalent to transplanting the entire drivers side of a BA dash, as well as the ICC and all the electronic s**t most probably..... you really do inspire people to try the unknown don't you Phil???
_________________ Owning 1 of 67612 EF GLi Sedans made
|
|||
| Top | |
|||
| wicksy |
|
|||
|
Happy wrote: Interceptor wrote: define "fit" 1:a straight bolt in job with no more work than changing the plugs? hahaha keep dreaming 2: a LOT of custom work to get it to fit, then changing all the plugs? hahaha if you're lucky 3: an absoloute s**t of custom work equivalent to transplanting the entire drivers side of a BA dash, as well as the ICC and all the electronic s**t most probably..... you really do inspire people to try the unknown don't you Phil??? lol i was going to say something alond them lines
_________________ Now i have a EF XR8 5spd.........mmmmmm 5L |
|||
| Top | |
|||
| twirqurky |
|
||
|
lol nice comment
|
||
| Top | |
||
| Interceptor |
|
||
|
Happy wrote: Interceptor wrote: define "fit" 1:a straight bolt in job with no more work than changing the plugs? hahaha keep dreaming 2: a LOT of custom work to get it to fit, then changing all the plugs? hahaha if you're lucky 3: an absoloute s**t of custom work equivalent to transplanting the entire drivers side of a BA dash, as well as the ICC and all the electronic s**t most probably..... you really do inspire people to try the unknown don't you Phil??? comes from having people ask how much a "basic" stero for a car will cost..... depends on your idea of basic..... $200 for a sound 4 HU, crappy 4" speakers and nothing else, or $20k for a nice HU, splits, rear fill, a pair of subs and 2 amps....
_________________ Banned |
||
| Top | |
||
| Happy |
|
|||
|
Grumblexr6 wrote: Would any1 know if a BA XR cluster fit into an XH at all or what can you tell me im guessing at least you would have to change all the connectors but if there anything else i should know do tell Thanx
big job, do you have a BA doner car? possibly be able to by swapping a s**t load of the internal wiring etc... when it comes down to it - both cars are just shells with different bits inside. If you had the time and a complete BA to rip apart I think it could be done.
_________________ Owning 1 of 67612 EF GLi Sedans made
|
|||
| Top | |
|||
| xpression |
|
|||
|
the BA Cluster is a computer on the CAN BUS network the BA uses for module communication, and it gets all its inputs from the can bus, so in order for it to work u'd need the ECU etc out of the BA, which neccesitates engine, gearbox and dash swap as well...
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 67 guests |
