|
Rat |
|
|||
|
My xe interior is that s**t cream colour with oil staines on seat(previous owner)
Has anyone replaced the xe interior with a xf fairmont ghia interior(grey) or ltd interior (grey) pics please if possible
_________________ SIGNATURE REMOVED DUE TO BREACH OF GUIDLINES. |
|||
Top | |
alfy |
|
|||
|
im sure the LTD seats wont fit as the rear seats are too wide. but you can fit the front seats i think and retrim the rear seats with the LTD velour.
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
Top | |
Gab1 |
|
|||
|
Alfy is wrong, all the seats, and infact the complete interior except for the carpet will fit straight in. I have fitted a ZL Fairlane rear seat to an XF and it fits perfectly.
Gab |
|||
Top | |
alfy |
|
|||
|
lol sorry i was thinking N-series Fairlanes, the rear seats dont fit in SWB E-series falcons.
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
Top | |
The Dog |
|
|||
|
I've done the ghia conversion. Pretty straightforward if you've got the time (I did the windows, dash, cruise, central locking etc)
_________________ You'll ride a black tornado across the western sky
|
|||
Top | |
Rat |
|
|||
|
i already have the black dash and centre concole(standard) i would just like the front seats, rear seats, carpet, door trims, roof lining, parcel shelf. my dash and centre concole are in perfect condition. will all of the neccesary interior bolt up into the same holes??and clip on in the same spots?? cheers
_________________ SIGNATURE REMOVED DUE TO BREACH OF GUIDLINES. |
|||
Top | |
Gab1 |
|
|||
|
Should all be fine you will have to make up some brackets to hold the inner door handles to the XE doors, or run XF doors, but it's not hard.
Gab |
|||
Top | |
Mitch_ |
|
|||
Posts: 6168 Joined: 5th Nov 2004 |
alfy wrote: lol sorry i was thinking N-series Fairlanes, the rear seats dont fit in SWB E-series falcons.
wrong again! they fit but bracket requires a litl bit of drilling, and the side bolsters don't fit because the seats are mounted further back
_________________ |
|||
Top | |
The Dog |
|
|||
|
Yeah the mounting points for door handles (interior) are different. The best bet is the xf (sedan not wagon or equivelant in fairlane )stuff as it will bolt stright in. As you aren't doing the electrical stuff everything else is easy.
_________________ You'll ride a black tornado across the western sky
|
|||
Top | |
alfy |
|
|||
|
Mitch_ wrote: alfy wrote: lol sorry i was thinking N-series Fairlanes, the rear seats dont fit in SWB E-series falcons. wrong again! they fit but bracket requires a litl bit of drilling, and the side bolsters don't fit because the seats are mounted further back bugger
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
Top | |
jaikai |
|
||
|
Easiest way would be to chuck the doors on and holesaw the pillars for the wiring grommets, most of the door wiring runs under the carpet...hook the mirrors up to each other (3wires) and run earth on pillars, behind kick panels, the power wire can come from any 12V accessory wire...plenty to choose near the fuses. window wiring can be hooked to power and a relay pretty easy. that`ll get the power mirrors, windows, door trims and handles done piece of piss. the original electric locking mech will be a PITA, needs 4 relays...that`s why ghia/fairlane havespeakers in the doors.
the seats will fit from XFghia-ZL fairlane no worries. dunno about console or carpet...might need to fiddle with rear parcel shelf a bit too. roof lining is easier replaced by a trimmer...for 200 odd bucks, I would`nt bother with doin it meself. You are gonna fit all the front/rear courtesy lights too...? JAIKAI |
||
Top | |
Rat |
|
|||
|
thanks 4 dat but im not gunn install the front and rear courtsey lights and and there will only b electrics in the fron doors(maybe)
_________________ SIGNATURE REMOVED DUE TO BREACH OF GUIDLINES. |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 72 guests |