Fordmods Logo

F*** idle 

 

Page 1 of 1 [ 11 posts ] 

 
 Post subject: F*** idle
Posted: Wed May 21, 2008 10:52 am 
Parts Gopher
Offline
User avatar

Posts: 77

Joined: 17th Feb 2008

Location: sydney
NSW, Australia

hey guys, just bout ready to throw my EL in the bin. The other day i changed the oxy sensor because the idle was prettty jumpy, after i changed it there was an improvement but when i switched it over to petrol the thing didnt want to move at all, i put my foot down a bit (bad idea), heard a bit of a pop come from the engine bay so switched it back to LPG. Now when ever i pull up at a set of lights and the revs drop below 1200-1300 the car starts to shake pretty badly and the revs drop pretty much all the way to zero for a second before they come back up to normal. This'll happen for about an hour until the car gets some real tempreture into it and then it stops. Any ideas guys?
cheers.

 

_________________

"I believe that Human beings and fish can peacefully coexist" - George W Bush

Top
 Profile  
 
 
Posted: Wed May 21, 2008 11:40 am 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 4401

Joined: 25th Mar 2005

Ride: BA XT, BA XR6T, ED Ghia 5.0

Location: Perth
WA, Australia

Check for and leaks in your air intake.. or dodgy airflow sensor.. my ED did exactly that on petrol but not gas when it had a hole in the intake piping after the airflow sensor.

 

_________________

What's the difference between a Holden and a sheep? It's less embarrasing getting out of the back of a sheep..

Top
 Profile  
 
 
Posted: Wed May 21, 2008 12:55 pm 
Stock as a Rock
Offline

Posts: 189

Joined: 5th Mar 2007

Ride: 94 Futura

Location: Midland
WA, Australia

If its playing up on petrol and gas then its not likely to be the injectors when its on gas. Reset PCM and get check distributor and coil. My moneys on the coil.

Cheers,
C
Top
 Profile  
 
 
Posted: Wed May 21, 2008 6:28 pm 
Parts Gopher
Offline
User avatar

Posts: 77

Joined: 17th Feb 2008

Location: sydney
NSW, Australia

well we can rule out coil as that was changed about 3 weeks ago along with leads, spark plugs and a new oxy sensor, Im pretty sure that my injectors ar cactus but that doesnt explain that shake that occurs when its on gas, as i said before when i changed the oxy sensor I thought id see how it'd run on petrol. The car didnt wanna move or rev at all it felt like I was drivin a tractor and as soon as i put my foot down a bit a heard a pop coming from the engine bay It wasnt a backfire so im not sure what it was but yeah that shake started occuring after I switched it back to LPG, by the way how do i reset the PCM?
Cheers guys

 

_________________

"I believe that Human beings and fish can peacefully coexist" - George W Bush

Top
 Profile  
 
 
Posted: Wed May 21, 2008 6:29 pm 
Parts Gopher
Offline
User avatar

Posts: 77

Joined: 17th Feb 2008

Location: sydney
NSW, Australia

and oh, just put a new intake on it long ago the airflow sensor could be a possibility, how hard is it to change?

 

_________________

"I believe that Human beings and fish can peacefully coexist" - George W Bush

Top
 Profile  
 
 
Posted: Wed May 21, 2008 9:38 pm 
Getting Side Ways
Offline
User avatar

Age: 42

Posts: 850

Joined: 10th Nov 2004

Gallery: 20 images

Ride: 03 BA Fairmont

Location: Forest Lake
QLD, Australia

unplug map sensor. see what happens

 

_________________

Regards,
Punnisher_42
_____________
2003 BA Fairmont - Stock standard
1994 U13 cough Nissan Cough Bluebird

Favorite Quotes:
"Sportwagon = homo-erotic wank-fest." - downingj

Top
 Profile  
 
 
Posted: Wed May 21, 2008 11:19 pm 
Parts Gopher
Offline
User avatar

Posts: 77

Joined: 17th Feb 2008

Location: sydney
NSW, Australia

and run it without it?

 

_________________

"I believe that Human beings and fish can peacefully coexist" - George W Bush

Top
 Profile  
 
 
Posted: Thu May 22, 2008 9:14 am 
Parts Gopher
Offline
User avatar

Posts: 77

Joined: 17th Feb 2008

Location: sydney
NSW, Australia

I just disconnected the MAP sensor and took it for a drive the drive wasnt as smooth but that damn shake was gone so when i got home I had another look and noticed the hose from the BBM to the sensor was disconnected so i plugged it back in and plugged the sensor back in and took it out again. Now that shake came back but not nearly as much the odd thing is i took it round the block a few times and the only place were it would do it was going down a hill, any how does it look like a dead MAP sensor? if so ive got one off an EB so will it fit?
Cheers guys

 

_________________

"I believe that Human beings and fish can peacefully coexist" - George W Bush

Top
 Profile  
 
 
Posted: Thu May 22, 2008 6:16 pm 
Getting Side Ways
Offline
User avatar

Age: 42

Posts: 850

Joined: 10th Nov 2004

Gallery: 20 images

Ride: 03 BA Fairmont

Location: Forest Lake
QLD, Australia

dont know for sure but i think they are different.
my eb started loping at idle and stalling, i simply unplugged the MAP sensor with the engine running to see what happened (electrical connector). immediately the idle leveled out. went and ripped a second hand one of a car at the wreckers and had no problems since.

 

_________________

Regards,
Punnisher_42
_____________
2003 BA Fairmont - Stock standard
1994 U13 cough Nissan Cough Bluebird

Favorite Quotes:
"Sportwagon = homo-erotic wank-fest." - downingj

Top
 Profile  
 
 
Posted: Thu May 22, 2008 6:34 pm 
Parts Gopher
Offline
User avatar

Posts: 77

Joined: 17th Feb 2008

Location: sydney
NSW, Australia

Well i pulled the MAP sensor of the scrap EB that ive got lying in my drive way and they looked identical, model number and other numbers were pretty much the same as well so i thought i bung it on and see what happens, car runs alot better now, feels more responsive and a tad more power down low thanx punnisher oh and btw, GO THE BLUESS!!!

 

_________________

"I believe that Human beings and fish can peacefully coexist" - George W Bush

Top
 Profile  
 
 
Posted: Thu May 22, 2008 8:50 pm 
Getting Side Ways
Offline

Age: 55

Posts: 903

Joined: 7th Sep 2007

Gallery: 3 images

Ride: BF3 Egas wag SY AWD Terry Ghia

Location: Brookfield
VIC, Australia

yeah I was going to say it's definitely the map sensor

 

_________________

BF3 Egas XT Wagon
SY Territory Ghia AWD 6spA :))

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 11 posts ] 

Who is online

Users browsing this forum: No registered users and 25 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Nov 23, 2024 4:00 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names