|
| comhelp |
|
||
Age: 41 Posts: 638 Joined: 6th Nov 2004 Ride: 1994 Ford EF Fairmont Ghia Sedan Location: Melbourne |
Hey guys. Does anyone know of a GOOD LPG place where i can take my EF falcon to?
I need to get my tank re-certified (Past the 10 years). I also need a new gauge/float as the gauge is reading incorrect (Both on the tank AND dash and yes the wiring is correct) and it also needs a new service valve. I can turn off the valve and still gas running  I also need it to get a good tune up and a general look over as the previous owner tried to do his own fitment and stuffed it up majorly So yeah if someone can point me in the right direction, that would be great and also a rough price guide as per the above. Thanks
_________________ 1994 ford fairmont ghia - Currently 302 with T5 - Work in progress |
||
| Top | |
||
| twase |
|
|||
|
I have an EF sedan tank thats certified till 2018 that I am selling for $120. I think you will find that way cheaper than recertification (at least it is up here) Pickup in Bendigo over XMAS if you are intereted. Had a new valve installed during the cerification.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
If you need valves replaced ^^^^ probably isn't a bad deal.
Unless it's a different style of tank mount or valve arrangement, then the savings will be spent on refitting a plumbing. |
||
| Top | |
||
| comhelp |
|
||
Age: 41 Posts: 638 Joined: 6th Nov 2004 Ride: 1994 Ford EF Fairmont Ghia Sedan Location: Melbourne |
Thanks twase but i dont think that i will have the money over xmas
 will have to see how many i work  tickford_6 will a LPG place certify this tank on my car? i.e. issue a new compliance plate?
_________________ 1994 ford fairmont ghia - Currently 302 with T5 - Work in progress |
||
| Top | |
||
| twase |
|
|||
|
comhelp wrote: Thanks twase but i dont think that i will have the money over xmas will have to see how many i work tickford_6 will a LPG place certify this tank on my car? i.e. issue a new compliance plate? No the tank must be removed and gas exhausted and then its pressure tested. If it passes it gets the compliance plate stamped and a certificate issued.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
The tank needs to come out of the car, The actual certification cost is only $120 - $200 depending on the size of the tank and the type of safety relief valve. The extra cost will be labor for remove/refit.
The tank needs to be removed by an authorized installer and certified by an authorized cylinder testing station. then re fitted by the authorized installer. The installer will then inspect the entire system for compliance with AS1425 and issue a certification. The rules on needing to issue a new compliance plate seem to be blurry depending on who answers the phone when you tank to Mines and Energy. I issue a new plate as the plate costs $1 and takes 5 mins to fill out and fit. It's just not worth hassle it could create by not fitting a new plate. |
||
| Top | |
||
| comhelp |
|
||
Age: 41 Posts: 638 Joined: 6th Nov 2004 Ride: 1994 Ford EF Fairmont Ghia Sedan Location: Melbourne |
Thanks so even if i get a tank has been certified, i still need to get it pressure tested?
_________________ 1994 ford fairmont ghia - Currently 302 with T5 - Work in progress |
||
| Top | |
||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
Sorry I miss read what you said before i made that post.
If you buy the above tank you don't need to have re tested. When its fitted to the car the installer is required to carry out an inspection of the entire gas installation and issue you with a certification or advice on repairs. |
||
| Top | |
||
| comhelp |
|
||
Age: 41 Posts: 638 Joined: 6th Nov 2004 Ride: 1994 Ford EF Fairmont Ghia Sedan Location: Melbourne |
ok thanks that what i thought
 So can you recommend any good fitters down here that could do that? thanks
_________________ 1994 ford fairmont ghia - Currently 302 with T5 - Work in progress |
||
| Top | |
||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
comhelp wrote: ok thanks that what i thought So can you recommend any good fitters down here that could do that? thanks Can't recommend anyone in VIC as i'm in QLD. there are a few vic members here one or two of them are gas fitters and may be able to recommend someone local. |
||
| Top | |
||
| The Panel Van Man |
|
||
|
What part of Melb are you in. Regards TPVM.
_________________ SALT IS FOR RACING ON. SAUCE IS FOR FISH & CHIPS. |
||
| Top | |
||
| comhelp |
|
||
Age: 41 Posts: 638 Joined: 6th Nov 2004 Ride: 1994 Ford EF Fairmont Ghia Sedan Location: Melbourne |
Footscray but any part of vic that is connected with metro will be fine
_________________ 1994 ford fairmont ghia - Currently 302 with T5 - Work in progress |
||
| Top | |
||
| The Panel Van Man |
|
||
|
Sorry I am out in the East so probably not worth it.you should be able to find someone local. Any Gas
place should be able to R&R a tank without any problems you would think. Let your fingers do the walking, they will ask what type of tank you have IE Multivalve or 4 separate valves. If it's an APA tank it has 4 valves they are the cheaper style to test. Regards TPVM.
_________________ SALT IS FOR RACING ON. SAUCE IS FOR FISH & CHIPS. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 18 guests |
