|
twase |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: I would take a punt and say its a primer for LPG only starting. Yours isn't full GRA is it? Your running GRA throttle body with some other converter (from the pictures your converter looks larger and is mounted vertically). I originally though it was for gas starting, however, one of the documents I have here talks about it opening at cruise and whatnot aswell. I did have a GRA B2 (same as yours) installed for a while but there was no decernable difference so I put the vialle back on.
_________________ BF Fairmont Ghia Series II update. |
|||
Top | |
gogetta |
|
|||
|
i think that that solenoid is for cold start priming...cause if u look at a impco L converter that is how they do it...B2 is a copy of the impco
_________________ |
|||
Top | |
EFFalcon |
|
|||
|
the solenoid is for cold start priming, but i beleive its also used with the closed loop controller to richen the mixture when u stab the throttle.
It goes to one of the ports on the under side of the throttle body. as seen in the pics, the other line goes to the ISC Block. I've pulled mine apart a few times so i could remmeber where everything went
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
Top | |
EFFalcon |
|
|||
|
the above converter is a GRA converter.
its also worth noting that normal B2's can be converted to work with GRA systems with a $12 spring kit.
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
Top | |
twr7cx |
|
|||
|
Thanks for that. It answers my questions, but creates a new problem for me now. I don't have a connection on my throttle body for the line from the starter primer to connect to.
gogetta - any chance of a photo showing specifically were the line from the starter primer connects to on the throttle body? I think the only difference is that I removed the barb from the starter primer and fitted it into the converter, were you've got a line running to it remotely mounted. |
|||
Top | |
EFFalcon |
|
|||
|
on the underside of my TB i have 4 very small brass fittings.
2 arnt drilled, 2 are. one goes to where the metering rod is (progressive circuit) second one goes to the solenoid you're mentioning.
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
Top | |
twr7cx |
|
|||
|
{USERNAME} wrote: on the underside of my TB i have 4 very small brass fittings.
2 arnt drilled, 2 are. one goes to where the metering rod is (progressive circuit) second one goes to the solenoid you're mentioning. I need to drill 1 of those holes then. Do you know which 1 it is - http://www.gasresearch.com.au/IN-0009.pdf (see the second half of the page). I'm guessing it's the vapour injection port, but would love confirmation before I drill... |
|||
Top | |
Rick's EF Fairmont Wagon |
|
||
|
have you looked at the converter manufacturers site yet?
http://www.lgmotorgas.com.au/navigation.htm
_________________ BF3 Egas XT Wagon |
||
Top | |
twr7cx |
|
|||
|
{USERNAME} wrote: have you looked at the converter manufacturers site yet?
http://www.lgmotorgas.com.au/navigation.htm Nothing on that site in the way of documents. And they're the original manufactuer of the converter, but GRA rebuilt it and supplied the rest of the components. |
|||
Top | |
twr7cx |
|
|||
|
{USERNAME} wrote: on the underside of my TB i have 4 very small brass fittings.
2 arnt drilled, 2 are. one goes to where the metering rod is (progressive circuit) second one goes to the solenoid you're mentioning. Just had a feel and bit of a look under mine and there's only 2 brass fittings under there 1 already with a hose, need to remove it and drill out the other one than i guess. |
|||
Top | |
twr7cx |
|
|||
|
I drilled the other brass fittign out under my throttle body. There's only 2 there. The one that I just drilled out isn't the correct one I don't think, but I'm going to give it a go.
|
|||
Top | |
twr7cx |
|
|||
|
|
|||
Top | |
gogetta |
|
|||
|
its just a hose clamp
_________________ |
|||
Top | |
twr7cx |
|
|||
|
{USERNAME} wrote: its just a hose clamp
dang, how stupid of me. somehow, i managed to miss noticing the entire band of the clamp, only saw the screw part inline with the hose and started wondering if it was something funny... |
|||
Top | |
muncher2002 |
|
|||
|
here is a picture from the gra webpage of one fitted and painted
http://gasresearch.com.au/ford6cyl.JPG i dont know how to put pictures up
_________________ need a rotisserie for a classic resto 0471525912 Tom |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 19 guests |