|
| xy0000 |
|
||
|
 can any one tell me the price of a full turbo gas kit for an Au falcon 
cheers |
||
| Top | |
||
| Mr.Kiss |
|
|||
|
What do you mean???
As in a price on just the LPG side of things?? Or As in the whole lot, LPG conversion and the full turbo kit??? So not to sound mean or anything, but what your asking is the same as how long is a piece of string??? But generally when talking about turbo conversions you should set aside atleast 10K to play with...
_________________ My Cars |
|||
| Top | |
|||
| Mechan1k |
|
||
|
If going turbo ... I'd suggest a decent injected system (around the $4000 mark).
Depends on the turbo setup ... but it will come down to injector flow rate more than anything ... and what parts you are going to use as well. Ballpark figure for turbo kit inc. ECU and installed ... just over the $10K mark. But these are only rough figures. After seeing turbo projects ... things go wrong ... and extras need to be done ... so that $10K figure can sometimes balloon out to $15-20K.
_________________ 04 Territory TX AWD - Winter White - optioned up |
||
| Top | |
||
| rolfey73 |
|
||
|
anyone know of a company in perth that touches gas cars, in respect to stroking them or putting a turbo on for rapid power gains??
|
||
| Top | |
||
| Private9 |
|
|||
|
rolfey73 wrote: anyone know of a company in perth that touches gas cars, in respect to stroking them or putting a turbo on for rapid power gains??
You wouldn't want to stroke a Ford 6 mate, the strokes are already very long and by going further you'll simply hinder power productivity. |
|||
| Top | |
|||
| MooseMan |
|
|||
|
Im fed up with people saying oh you need at least 10k for a decent turbo set up. blah blah. I know one person for a fact that is running low 13s with a turbo setup on an EB that cost him $2500, he is usign the stock ECU but put aside $1500 for that and he still comes in at $4000. He has been running the setup for at least 6mths with no problems. If you want everything to be NEW and to run like it was put there from the factory then sure put aside 10k but it can be done for MUCH cheaper.
_________________
|
|||
| Top | |
|||
| dynowog |
|
||
|
yes can be done on the cheap!
go injected gas $4000-$5000 turbo kit $4000-$6000 all new bits or call me 0405 400 572 |
||
| Top | |
||
| ltd351T |
|
||
|
hey about this injected gas, have you guys actually pulled decent power from the systems? I know people who have used injected gas systems and the flow of gas just wasnt enough.
|
||
| Top | |
||
| EXAR6 |
|
||
|
i paid 3500 for straight gas setup gas research. but i got 2000 bak.it was on a ed xr6 turbo. made 230rwkw on 8psi.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 22 guests |
