|
| fairmont 1 |
|
||
|
hi
instead of the ring in the intake is it possible to get lpg injectors hooked up to the cars original ecu and use a converter and ecu that suits a mixer ring to run the gas and use the cars factory ecu to run the lpg injectors. is injectors better than the ring or the other way around can the intake of a older lpg set up be changed to get the power back to petrol and get more kms set up below for older lpg mixer intake __________Mixer Ring___________ *** *** Throttle Air body Box ***_____Normal Intake Hose________*** You do not have the required permissions to view the files attached to this post. |
||
| Top | |
||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
No it doesn't work like that.
|
||
| Top | |
||
| Matt_jew |
|
||
|
Nope.
The injected LPG needs its own ECU which piggy backs off the factory one and intercepts the factory injector pulses and modifys them to suitthe gas. I have just installed an injected LPG system into my Maverick. While it is fairly simple to do there is more to it then what you are thinking.
_________________ xr6turnip wrote: More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around! |
||
| Top | |
||
| fairmont 1 |
|
||
|
what do you need to istall injected lpg
is a dual intake hose as in 2 side by side to get more air in with the mixer in one of them (silicone y adaptor to split into 2 run 2 intake hoses with a mixer in one and just a straight one in the other and another silicone y adaptor to split back into 1) |
||
| Top | |
||
| ToranaGuy |
|
|||
|
fairmont1 wrote: what do you need to istall injected lpg is a dual intake hose as in 2 side by side to get more air in with the mixer in one of them (silicone y adaptor to split into 2 run 2 intake hoses with a mixer in one and just a straight one in the other and another silicone y adaptor to split back into 1) NO NO NO! Couldn't be more wrong! It's already been mentioned what is required to run LPG injection, don't post misinformation such as this! Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts| |
|||
| Top | |
|||
| fairmont 1 |
|
||
|
how do you get more air in with a mixer ring so its not so restricted
|
||
| Top | |
||
| ToranaGuy |
|
|||
|
fairmont1 wrote: how do you get more air in with a mixer ring so its not so restricted You don't, unless you can find a bigger mixer ring. If you bypass the mixer ring the car will run really lean, which is really bad. The mixer ring setup works by the restriction, it creates a vacuum that draws the LPG into the intake, it's the most basic, cheapest & nastiest way to convert an engine to LPG. If you want more power, junk that crap & get a better setup like, ie maybe an impco225, a gas research or an injected LPG kit. Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts| |
|||
| Top | |
|||
| fairmont 1 |
|
||
|
can you make the rstricted hole in the mixer bigger
and instead of having a mixer ring can people just plumb a hose directly into the intake manifold plenum if they originally had a ring |
||
| Top | |
||
| ToranaGuy |
|
|||
|
fairmont1 wrote: can you make the rstricted hole in the mixer bigger and instead of having a mixer ring can people just plumb a hose directly into the intake manifold plenum if they originally had a ring Not without stuffing up the mixer ring. You need to either find a larger mixer ring (rather hard to do) or fit something less restrictive like an impco225. No you can't just plumb the hose into the intake, it won't mix the LPG with the air stream properly, it will have poor afr's & be lucky to run at all. Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts| |
|||
| Top | |
|||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
I'll sell you this ford-lpg-hydrogen-hho-cng-conversions-f44/3-inch-s-s-intake-with-lpg-ring-mixer-t114065.html
For $250 plus postage. that is about what it cost me make it. Any bigger on the mixer ring and you have issues with part throttle low engine speed mixture controll. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 19 guests |
