Fordmods Logo

sugestions on impco size or alternative. 

 

Page 1 of 1 [ 8 posts ] 

 
 Post subject: sugestions on impco size or alternative.
Posted: Wed Aug 01, 2007 10:55 pm 
Fordmods Newbie
Offline

Posts: 5

Joined: 29th Jul 2007

Ride: EF XR8

Location: Taree
NSW, Australia

I have a 95 XR8 i will be soon supercharging it with most likely an eaton M112 (something different) i am also thinking of running LPG due to the higher cylinder presure. any sugestions on LPG converter sizes? i am planing on running a draw through setup for simplicity.

Thank You
Top
 Profile  
 
 
Posted: Thu Aug 02, 2007 11:05 am 
Stock as a Rock
Offline

Posts: 170

Joined: 10th Nov 2005

Location: Canberra
ACT, Australia

at least single GRA510 or impco 425

better to use twin gra440's or twin impco 425's

B2 or E converters

VFF30 vacuum lockoff

tank flow will run out at some point dependant upon weather, and fuel mix. there are ways around this.

I would say starting with a single 425 and model E converter, using a VFF30 lock, would be the simplest and easiest to tune.

Impco is very easy to tune, gra is not, but gra is much easier to package, as impco is bulky.

 

_________________

{DESCRIPTION}

2V 351T, 732rwhp@15psi on LPG.

Top
 Profile  
 
 
Posted: Thu Aug 02, 2007 12:07 pm 
Getting Side Ways
Offline
User avatar

Age: 53

Posts: 8590

Joined: 5th Nov 2004

Gallery: 5 images

Ride: AU Fairlane 5.0, KE Laser, 01 Kw

Location: Melbourne
VIC, Australia

Agree with above, but not sure how a 425 would go with forced induction?
I'd also recommend the E convertors, they pump s**t of gas through, they originally came out on the factory 460 in the Ford Louisville and also ran the 425.
Top
 Profile  
 
 
Posted: Thu Aug 02, 2007 12:56 pm 
Stock as a Rock
Offline

Posts: 170

Joined: 10th Nov 2005

Location: Canberra
ACT, Australia

{USERNAME} wrote:
Agree with above, but not sure how a 425 would go with forced induction?
I'd also recommend the E convertors, they pump s**t of gas through, they originally came out on the factory 460 in the Ford Louisville and also ran the 425.


they work fine with boost, he's running suck through, impco GRA etc etc, most simple vapour carbed systems will run blow through with boost, just need a balance line.

 

_________________

{DESCRIPTION}

2V 351T, 732rwhp@15psi on LPG.

Top
 Profile  
 
 
Posted: Thu Aug 02, 2007 4:31 pm 
Fordmods Newbie
Offline

Posts: 5

Joined: 29th Jul 2007

Ride: EF XR8

Location: Taree
NSW, Australia

Thanks for the help i will research it. if anyone has any more information it always welcome.
Top
 Profile  
 
 
Posted: Thu Aug 02, 2007 11:13 pm 
Fordmods Newbie
Offline

Posts: 5

Joined: 29th Jul 2007

Ride: EF XR8

Location: Taree
NSW, Australia

Ive heard that the GRA's once set dont often have to be retuned.
Is this correct?
Top
 Profile  
 
 
Posted: Thu Aug 02, 2007 11:50 pm 
Stock as a Rock
Offline

Posts: 170

Joined: 10th Nov 2005

Location: Canberra
ACT, Australia

most will tell you otherwise, impco is the best to tune, gra is hard to tune, and requires knowledge and machine work to get 100% correct, for example, in the ACT there is nobody that likes the GRA carbs for blow through forced induction, its not that they dont work, its just that the tuners hate tuning them, sure they can but they recomend against them for that very reason, impco, anyone can tune.

Seriously I'd use impco if you can fit it in, GRA is smaller and more compact, both will deliver good perfromance.

 

_________________

{DESCRIPTION}

2V 351T, 732rwhp@15psi on LPG.

Top
 Profile  
 
 
Posted: Sat Aug 04, 2007 8:30 am 
Fordmods Newbie
Offline

Posts: 5

Joined: 29th Jul 2007

Ride: EF XR8

Location: Taree
NSW, Australia

Thanks for the help i will now have to start looking for all the parts i need.
Its going to cost abit but in the long run i think it will be worth it.

Ata guess how many people in aus have m112 or similar on there Falcon?
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 8 posts ] 

Who is online

Users browsing this forum: No registered users and 22 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
cron

 

 

It is currently Tue Dec 24, 2024 4:57 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names