|
tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
Had another non compliant LPG system through work today and this one is BAD.
Original install was done in ACT in 2008. It has an Autronic vapor injection system, which use compression fittings, BIG NO NO. It's also a very ugly under bonnet install. The installer used an incorrect doughnut tank under a falcon wagon, There was no way I could reach the service valve with out removing the tank from the car, the tank also had no stone guard and is damaged from being scrapped on the ground going up driveways etc. The filler hose passes through a steel panel with no protection from abrasion. When the LPG inspector looked over it he couldn't stop shaking his head in disbelief. The end result is the inspector has taken all the details and photos of all the non compliance and will follow it up. A defect notice has been issued and the only way to 'fix it' is to completely remove the system and start again. The owner is chasing up the original installer in an effort to get him to pay for the removal of the system. |
||
Top | |
bry40l |
|
|||
|
{USERNAME} wrote: Had another non compliant LPG system through work today and this one is BAD. Original install was done in ACT in 2008. It has an Autronic vapor injection system, which use compression fittings, BIG NO NO. It's also a very ugly under bonnet install. The installer used an incorrect doughnut tank under a falcon wagon, There was no way I could reach the service valve with out removing the tank from the car, the tank also had no stone guard and is damaged from being scrapped on the ground going up driveways etc. The filler hose passes through a steel panel with no protection from abrasion. When the LPG inspector looked over it he couldn't stop shaking his head in disbelief. The end result is the inspector has taken all the details and photos of all the non compliance and will follow it up. A defect notice has been issued and the only way to 'fix it' is to completely remove the system and start again. The owner is chasing up the original installer in an effort to get him to pay for the removal of the system. do you have any pictures? i like pictures
_________________ BF XR6 |
|||
Top | |
tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
{USERNAME} wrote: {USERNAME} wrote: Had another non compliant LPG system through work today and this one is BAD. Original install was done in ACT in 2008. It has an Autronic vapor injection system, which use compression fittings, BIG NO NO. It's also a very ugly under bonnet install. The installer used an incorrect doughnut tank under a falcon wagon, There was no way I could reach the service valve with out removing the tank from the car, the tank also had no stone guard and is damaged from being scrapped on the ground going up driveways etc. The filler hose passes through a steel panel with no protection from abrasion. When the LPG inspector looked over it he couldn't stop shaking his head in disbelief. The end result is the inspector has taken all the details and photos of all the non compliance and will follow it up. A defect notice has been issued and the only way to 'fix it' is to completely remove the system and start again. The owner is chasing up the original installer in an effort to get him to pay for the removal of the system. do you have any pictures? i like pictures I always take pics of this sort of thing and store them on my laptop at work. Will bring some home and shrink them to suit uploading. |
||
Top | |
hans hartman |
|
||
|
whats new,all the shonkys run riot in act.
_________________ R.I.P HANS HARTMAN |
||
Top | |
PoweredByCNG |
|
||
|
Disgusting. And people wonder why LPG-fuelled cars have such a bad reputation in this country.
_________________ 2005 VZ Commodore SV6 with OMVL Dream XXI SVI LPG |
||
Top | |
tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
|
||
Top | |
Lucion |
|
||
|
{USERNAME} wrote: Ok I dont know anything about LPGas instals. the car I have is the first car I have ever had on gas and i have only had it for 6 months....But hell mate that looks so messy to me..I would not run vacuum hoses like that let alone LPG |
||
Top | |
Johnson stroker |
|
|||
|
My 5 year old could do better with plastic bob the builder tools and no training.
_________________
|
|||
Top | |
twase |
|
|||
|
{USERNAME} wrote: It has an Autronic vapor injection system, which use compression fittings, BIG NO NO. By Compression do you mean the olive style fittings?
_________________ BF Fairmont Ghia Series II update. |
|||
Top | |
tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
{USERNAME} wrote: {USERNAME} wrote: It has an Autronic vapor injection system, which use compression fittings, BIG NO NO. By Compression do you mean the olive style fittings? Yes, |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 30 guests |