Due to a few upgrades, I have the following for sale.
Most parts were used on my turbo’ed EF, which made 260RWKW on 10psi.
The condition of everything is good to excellent, and I’m open to reasonable offers

Item: 8, 360cc Injectors Sold
Description: These were used in my car, I was only using 6 of them, which I had cleaned and flow tested under a year ago. The other two were cleaned, but no filter where put back in them. If you need 8 it wont cost very much to get two new filters installed.

Price $150



Item: 6, 550cc 6boost injectors Sold
Description: Never used, I bought these but they took so long to turn up I gave up and bought a different set.

Price $300



Item: Malpassie black top 2:1 Rising rate regulator
Description: Been working on my car for about 2 years now. Will not come with fuel pressure guage.

Price $130



Item AU VCT fuel rail
Description: flows 30% better then a standard fuel rail.

Price $75



Item: Clive Cams turbo grind cam Sold
Description: been used for about 1 ½ years, in perfect condition, comes will custom shims.

Price $120



Item: Top intercooler Pipe Sold
Description: Tig welded stainless steal intake pipe. It has a tube for a blow of valve near the bottom, and a bung for an air temp sensor near the top. Might be able to be modified to fit standard air box for a NA setup

Price: $100





Item: Modified Top inlet manifold
Description: Duel runners removed to provide a larger free flowing plenum. 16+ hours of milling work to get it to this stage.
Comes with two extra vacume barbs for things like boost controller, blow off valves and so on

Price: $125

Last edited by tjb45 on Thu Feb 15, 2007 5:21 pm, edited 3 times in total.

What can you tell me about that AU fuel rail, direct swap for the original EF one?

Yep, the fuel rail is a direct bolt in sway. No modifications or changes are required.

Whats the fuel pressure regulator on it? XR spec one?

I dont know, but I would image that it is..

O, and final question, how do you know it flows 30% better?

I don’t know for sure, but there was a guy on these forms, I think his username is xr9 or something like that, he had them all flow tested, and discovered the AU VCT to be the best stock rail.
When I put it on my car I dropped the over all fuel % back, as it was defiantly getting more fuel with that rail.

whats the lowest you'll go on that fuel rail including postage?

PM sent.

I did not say that. I have never tested AU fuel rails. In fact I doubt they would make a different fuel rail just for the VCT engine.

Cheers,
Pete.

sorry mate I had a feeling it was you. It must of been someone else.
I'll got back through my emails and try and find the info I was sent..

it's got hosetails instead of the geigh a** el ones with screw n push fittings. i'm guessing they ditched the push fittings because of them beings dangerous..
also alot easier to renew fuel lines with the hosetails.

I am keen on the top intercooler piping if it does not sell. i have an AU fairmont, do you thing it would clear the bonnet, and then i could just bang a pod on the end of it and bung the bottom bov hole.

cheers.

Updated Sold list.
I want everything gone, so make an offer if your not happy with the price..

thanks for the injectors and fast postage.