Hi guys, I'm looking at getting some more parts from the US.
I'll also be offering 1994-95 Mustang Underdrive Billet Aluminum 3 Piece Underdrive Pulley Set x6 for $120 each delivered when i recieve them. Have read through forums and was told 94-95 are for our cars. If this is incorrect please let me know.

I will have 1 set of Under drives extra. Sorry guys but this 1 will be $140. Got stung with $200 for shipping and then with dollar conversion cost me $50. Let me know if anyone wants its. Also have a 65mm polished t/body if anyone wants it as well for $175.


Trying to keep this below $1000 so no GST. Does the $1000 rule include delivery?

I wll also give buyers my tracking number from UPS when ordered. I would be looking at placing order when all monies deposited into my account. I will let buyers know when ordered in this thread. If there is plenty of interest I might be able to do this again. I have been asked to provide a cutoff date. Cutoff date will be 03/08/08. Delivery should be 7 days after order is done. I will provide buyers my tracking number so they know progress of shipment. I will then express post that day if it is before 3.00pm, if not next day.
Let me know if this is okay.

Was asked to provide my name and address details just to mods, but I will also publish these here.

Steven John Radford
399 Frankston Dandenong Rd
Frankston North,3200,Vic
Home Ph: 0387722752
Mob: 0422510423

Last edited by steven13 on Fri Aug 01, 2008 9:17 pm, edited 5 times in total.

Put my name down for a u/drive pulley set if they look like the ones pictured below.

Jeff

I knew you'd be in on the pulley set Jeff. Chromed and its Jeffs.

ps pulley is a press on type is it not? the pic illustrated seems as though it is a bolt on, similar to the crank pulley, is this correct? otherwise i'd be keen on the underdrive set.

Al

Haha, thats right. Although im not a fan of chrome, only polished for me .



The harmonic balancer is a "press" fit but in this case it is not getting changed. The actual belt pulley that is bolted to the front of the harmonic balancer is replaced aswell as the alternator and w/pump pulleys, both of which are also "bolt on".

Jeff

ah ok my bad, now i'm with it. well then yes steven i am very interested in the underdrive set, so consider me in.

Al

Guys pulleys are Billet Polished Aluminum Underdrive Pulley set
Heres the link.
http://www.blueovalindustries.com/produ ... d=99013200

Can take T/body & Egr off and add another pulley set if more interest in these.

Pulleys set so far
XH5LWEPN
Ausman



Thanks Steve

do the pulleys require a different belt? If people that already have them can garauntee there are no charging or cooling issues related to these then i'm interested. pretty sure cooling side of things will be o.k. just the charging side i'm worried about. batteries aren't cheap and microtech seem to be a lot more reliant on decent voltage than factory ecu.

Also interested in this, but would also like to know about the belt and cooling etc. more info is needed.

steve
put me down for a pulley set.
thanks steveurban.

Pulleys set so far
XH5LWEPN
Ausman
steveurban

These will affect charging and cooling as they are not spinning these as hard hence the power increase.

Does anyone have these specific pulleys on their 5.0?

Im down for a pulley set too. So, its $85 + $35 postage? If you are sourcing through blueoval that is...

Edit: I got my TB/EGR through BlueOval. They are good TBs although they can whistle at idle due to sharp edges around ISC ports. Haven't done mine but apparently a quick hack with a diegrinder will fix it. Also may wanna include a new TPS aswell? Will our TPS fit on this TB?

Last edited by s-tranzor on Thu Jul 31, 2008 5:05 pm, edited 1 time in total.

It is US dollars. I'm allowing $15 for express post and the rest of the cost is absorbed in shipping costs. By no way am I making money out of this. I'll also incure overseas credit card transaction fees as well.

Pulleys set so far
XH5LWEPN
Ausman
steveurban
s-tranzor

Can delete throttle body and make total of 7 underdrives.