|
| XH5LWEPN |
|
|||
|
A mate of mine had alot of these bits planned to go onto his EL XR8. Since then the vehicle was involved in an accident and he has now purchased another vehicle that these parts will not be needed on.
GT40P heads. These heads have been fully reco'd and done 6000k's since. They have been shaved 30thou and ported and flowed to 405hp. They are also fitted with upgraded springs to handle .550" lift. $900 Yella Terra 1.6 R/rockers. These are the street terra ones and are adjustable. Have also only done 6000k's on the heads above. $450 Explorer Manifold. This is a very rare version as it came off an ELII 185kw. So it comes with the intake air temp sensor hole in the lower section. Perfect for a bolt on e-series upgrade. $550 There may be other parts available in the next few days, just waiting on confirmation. These parts include, Brand new Crow 621371 cam, Brand new Rollmaster Timing set, Brand new Fel-pro 1011-1 H/gaskets, used ARP head stud kit, Pacemaker PH4000's or Di-filipo 4into1's, 2 x Magnaflow 2.5" Metal core cats, single 2.5 exhaust, BPT one piece u/drive nd possibly a few other bits. There is pretty much everything there to turn a sluggish e-series 5.0 into a nice stout streeter with 13sec potential. Only other thing you'd need is T/B, MAF and injectors. Will update asap. Reply here or PM for details. Can supply pics within the next week but straight away is not possible atm. Cheers Jeff
_________________ STREETBUILT RACING Last edited by XH5LWEPN on Mon Feb 25, 2008 9:14 pm, edited 1 time in total. |
|||
| Top | |
|||
| Bsjenko |
|
|||
|
very interested in Cam, timing set, cats, and whatever else you may have that i want.
Let me know wheh you know more. cheers BEN
_________________ The Lane Lives.... Finally!!!! |
|||
| Top | |
|||
| XH5LWEPN |
|
|||
|
{USERNAME} wrote: very interested in Cam, timing set, cats, and whatever else you may have that i want.
Let me know wheh you know more. cheers BEN No worries mate, will let you know. The cam is a very nice grind. Have seen it make well over 200rwkw with GT40P heads and is still capable of running on std ECU.
_________________ STREETBUILT RACING |
|||
| Top | |
|||
| MRE-50L |
|
|||
|
Headgaskets and head stud kitt Champ , $$$ ?
and say postage to 2115 Cheers 
_________________ Chance Favors The Prepared Mind ! |
|||
| Top | |
|||
| XH5LWEPN |
|
|||
|
{USERNAME} wrote: Headgaskets and head stud kitt Champ , $$$ ?
and say postage to 2115 Cheers No worries mate, Head studs are definately for sale, but h/gaskets arent certain yet, will know for sure tomorrow. Will let you know first. Jeff
_________________ STREETBUILT RACING |
|||
| Top | |
|||
| Stevo |
|
|||
|
also interested in the other bits.
pm me a price for the timing set and the cats when you can
|
|||
| Top | |
|||
| XH5LWEPN |
|
|||
|
MRE-50L, unfortunately didnt get an answer on the Gaskets today so will do my best to find out tomorrow. Sorry
Stevo, unfortunately there has been a rediculous amount of interest in the cats, so your currently sitting down the list mate. However i have no doubt that these will be used on the new EL in place of whatever is in there, hopefully that eases the pain  .
The timing set is on the same list of parts as the above head gaskets. So will have an answer tomorrow. Jeff
_________________ STREETBUILT RACING |
|||
| Top | |
|||
| MRE-50L |
|
|||
|
gaskets are fine im really interested in the head studs now , i think ive found felpro full engine gasket set now .
_________________ Chance Favors The Prepared Mind ! |
|||
| Top | |
|||
| XH5LWEPN |
|
|||
|
{USERNAME} wrote: gaskets are fine im really interested in the head studs now , i think ive found felpro full engine gasket set now .
No worries mate, too easy. Will get the head studs off him tomorrow make sure everything is there then let you know a price. Will most likely be around $80.
_________________ STREETBUILT RACING |
|||
| Top | |
|||
| MRE-50L |
|
|||
|
kewl
_________________ Chance Favors The Prepared Mind ! |
|||
| Top | |
|||
| Waggin |
|
|||
|
Willilng to negotiate on the RR's?
_________________ WAG363: AUII LTD Supercharged 363 Dart Stroker [{DESCRIPTION}] |
|||
| Top | |
|||
| XH5LWEPN |
|
|||
|
{USERNAME} wrote: Willilng to negotiate on the RR's?
Not at this stage mate
_________________ STREETBUILT RACING |
|||
| Top | |
|||
| XH5LWEPN |
|
|||
|
Alright guys, Just to clear this up the following parts were all purchased from my Performance shop in September last year. Obviously not being used and all still in original packets and boxes im looking at swapping them back to the shop in return for store credit. This will be happening this saturday so after then i can confirm sale and name a price.
Parts are as follows. Crow 621371 cam. 2 x Fel-pro 1011-1 H/gaskets. Rollmaster Timing set. (Torrington bearing type) Crane Rocker shims. Fe-pro Exhaust manifold gaskets.
_________________ STREETBUILT RACING |
|||
| Top | |
|||
| Steady ED |
|
|||
|
I'd be interested in the under drives and the difillipos.
No need for pics, if he wants to sell I'll take them, long as price isn't astronomical 
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| XH5LWEPN |
|
|||
|
{USERNAME} wrote: I'd be interested in the under drives and the difillipos.
No need for pics, if he wants to sell I'll take them, long as price isn't astronomical Di-filipo's are currently on hold for a local buyer. You are next on the list though. We have confirmed that they'll definately be for sale not the pacies so once i know whats going on i'll PM you. It will be just the single piece U/drive pulley (crank) that will be for sale, which requires the smaller belt. I can supply a used belt with it aswell. Would be looking for $60 bucks.
_________________ STREETBUILT RACING |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 80 guests |
