|
| Froudey |
|
||
|
I have a limp take off seems to lack ommph. when i take off from a standing start....
At the moment my car is an EB 3.9 = AU injectors = XH Air Intake = Genie SVO extractors = 2.5 Exhaust System = 5 Speed that is it it seems like it revs and i ride the clutch (i don't ride the clutch etc etc) would a worn old clutch plate or pressure plate etc etc limit the release....
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| Shortshift |
|
|||
|
Initially, it seems like your pressure plate is worn out.
How long since the clutch was replaced? Is the clutch cable sticking because it's kinked, frayed or needs some lube? Is the pedal box cracked and limiting the clutch pedal movement?
_________________ AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection |
|||
| Top | |
|||
| Froudey |
|
||
|
{USERNAME} wrote: Initially, it seems like your pressure plate is worn out.
How long since the clutch was replaced? Is the clutch cable sticking because it's kinked, frayed or needs some lube? Is the pedal box cracked and limiting the clutch pedal movement? 2nd Hand Clutch...... Seems like it had a fair amount of meat Clutch Cable........... Seems ok don't feel it doing anything weird Pedal Box............... This might be a factor cause it is just a bolt holding my pedal onto the auto box (t5 conversion) was acting wierd so got an 8mm think plate and bolted that with the bolt ( have a dodgy looking manual pedal box waiting to go in(when i have time))
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| HiBoost |
|
||
|
{USERNAME} wrote: I have a limp take off seems to lack ommph. when i take off from a standing start....
At the moment my car is an EB 3.9 = AU injectors = XH Air Intake = Genie SVO extractors = 2.5 Exhaust System = 5 Speed that is it it seems like it revs and i ride the clutch (i don't ride the clutch etc etc) would a worn old clutch plate or pressure plate etc etc limit the release.... why have u got AU Injectors? do u have some sort of a chip in the ecu?no ecu it could be the AU inectors which are fludding the cylinder low down RPM which kills the low down power(engine struggles to purn the extra fuel) and thats why u have crap take off. put the std injectors back in and ull c the difference...
_________________ 4LTR-JET: 9.1 @150mph!! |
||
| Top | |
||
| Froudey |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: I have a limp take off seems to lack ommph. when i take off from a standing start.... At the moment my car is an EB 3.9 = AU injectors = XH Air Intake = Genie SVO extractors = 2.5 Exhaust System = 5 Speed that is it it seems like it revs and i ride the clutch (i don't ride the clutch etc etc) would a worn old clutch plate or pressure plate etc etc limit the release.... why have u got AU Injectors? do u have some sort of a chip in the ecu?no ecu it could be the AU inectors which are fludding the cylinder low down RPM which kills the low down power(engine struggles to purn the extra fuel) and thats why u have crap take off. put the std injectors back in and ull c the difference... Cause i can ...... lol No this scenero happened prior to au injectors
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| phatba |
|
||
|
eb 3.9 litre? i thought only early ea's were 3.9 and then they went to 4 litre....
|
||
| Top | |
||
| phongus |
|
|||
|
Check your clutch fork isn't bent as well.
phong =P~
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| alfy |
|
|||
|
{USERNAME} wrote: eb 3.9 litre? i thought only early ea's were 3.9 and then they went to 4 litre....
4 litre was introduced with the EB2. EB1 and all EA's had 3.9.
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
| Top | |
|||
| Froudey |
|
||
|
{USERNAME} wrote: Check your clutch fork isn't bent as well.
phong =P~ hmm okay will have a look tomorrow when i replace my handbrake cable... so will it be bent or slightly disformed what should i look at
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| phongus |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: Check your clutch fork isn't bent as well. phong =P~ hmm okay will have a look tomorrow when i replace my handbrake cable... so will it be bent or slightly disformed what should i look at You could see if the rubber dampener on the end of it is in good nick as well as looking for warpage or something. phong =P~
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| 02tonna |
|
|||
|
just sell it and buy a ba or atleast a 4.0L EB
_________________ 02 BA Fairmont Ghia-- 24v 5.4L, Dumped, 18' Advanti's, Cold Air, 20% Tint |
|||
| Top | |
|||
| Froudey |
|
||
|
{USERNAME} wrote: just sell it and buy a ba or atleast a 4.0L EB
wtf this a old topic i have since fixed it... it was human related...
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| phongus |
|
|||
|
{USERNAME} wrote: just sell it and buy a ba or atleast a 4.0L EB
That wouldn't have helped his problem in launching his 3.9L... phong =P~
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| Punnisher_42 |
|
|||
|
{USERNAME} wrote: just sell it and buy a ba or atleast a 4.0L EB
where do we find these wankas??? god that pisses me!! it was an old topic but he still had to bring it back to he could prove he was a knob!!!!!
_________________ Regards, |
|||
| Top | |
|||
| 02tonna |
|
|||
|
rack off. its a well known fact that the 3.9L was the crappest motor ford produced. i should know i had a eb 3.9L. what im sayin is if you want a better take off get a 4.0L.. note the 2 guys that cracked it both own crappy 3.9L's. maybe this is the reason there ragging because of what i said.
_________________ 02 BA Fairmont Ghia-- 24v 5.4L, Dumped, 18' Advanti's, Cold Air, 20% Tint |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 9 guests |
