Fordmods Logo

anyone lookin for a half decent fuel setup??? 

 

Page 1 of 1 [ 9 posts ] 

 
 Post subject: anyone lookin for a half decent fuel setup???
Posted: Thu Jun 30, 2005 6:07 pm 
Stock as a Rock
Offline

Age: 36

Posts: 144

Joined: 9th May 2005

Ride: xf

Location: gosford
NSW, Australia

i recently (ish) bought a 250 x-flow turbo and it was on fuel but im goin straight gas... anyway...
it has an adjustable fuel pressure reg, 1lt surge tank, bosch VL turbo fuel pump, bosch pre-pump (low pressure) and 6 "magna" injectors.
i have since taken all out of motor and covered any openings... as far as i know they all work as i was told when i bought the motor they were all good
if anyone is interested please PM me with an offer and i will get back to you (ps. not looking for heaps they are just no use to me)
cheers i hope these are useful to someone...
Top
 Profile  
 
 
Posted: Thu Jun 30, 2005 6:43 pm 
Getting Side Ways
Offline
User avatar

Posts: 1960

Joined: 6th Nov 2004

Gallery: 22 images

Power: 315 rwkw

Location: Under the flight path of incoming packpackers
NSW, Australia

do you know what ratio the reg is?
Top
 Profile  
 
 
Posted: Thu Jun 30, 2005 6:45 pm 
Getting Side Ways
Offline

Age: 40

Posts: 3405

Joined: 7th Feb 2005

Ride: AU2 Ute

Location: melbourne
VIC, Australia

PM sent, I need something for the mini!
Top
 Profile  
 
 
Posted: Thu Jun 30, 2005 9:31 pm 
Getting Side Ways
Offline
User avatar

Age: 71

Posts: 3555

Joined: 7th Nov 2004

Gallery: 4 images

Power: 482 rwkw

Location: Penrith
NSW, Australia

Dansedgli wrote:
PM sent, I need something for the mini!


Or is that Dai ??? Lol.. Minidai....

 

_________________

As in ZOOM 126 edition
331 Dart block,3.25/ 4340 steel crank, Oliver rods,TFS ported track heat heads, TFS track heat inlet Twin SC61 turbo's
Project 1UZ-EF has started.. S475 Turbo 4.0 V8 Mustang Celica.....

Top
 Profile  
 
 
Posted: Sat Jul 02, 2005 1:29 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 812

Joined: 9th Nov 2004

Ride: xr6t

Location: Newcastle
NSW, Australia

Are the injectors still available? do you know how many lb they are?

 

_________________

Rides:
-Ba xr6t, wog cooler, K&N pod on custom intake, battery moved to other side, flash, custom cooler piping, presons auto, car pc, 19" lenso speed 6, going for 300rwkw
-FZR 250- run around bike

Top
 Profile  
 
 
Posted: Tue Jul 05, 2005 2:00 pm 
Stock as a Rock
Offline

Age: 36

Posts: 144

Joined: 9th May 2005

Ride: xf

Location: gosford
NSW, Australia

i have no idea how many pound the injectors are unfortunately so sorry bout that one
but yes they are available and they are "magna" injectors (not out of a magna tho...) so im told
umm i guess they go alright coz they were used to upgrade the ones in a 250 crossflow turbo so yer they must flow a bit
one looks a little suss like it was a bit charged on a bit of the plastic near where the wires plug up but the rest are fine and it doesnt look like it would effect the injector...
motor made 200hp at wheels on 6 pound no cooler 4.1L turbo deep dish pistons and copper head gasket etc.....
maybe that info will help a bit???
cheers
Top
 Profile  
 
 
Posted: Wed Jul 06, 2005 5:25 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 812

Joined: 9th Nov 2004

Ride: xr6t

Location: Newcastle
NSW, Australia

And what about the fpr do u know what ratio it is? Also how much are u looking for, for the injectors and fpr?

 

_________________

Rides:
-Ba xr6t, wog cooler, K&N pod on custom intake, battery moved to other side, flash, custom cooler piping, presons auto, car pc, 19" lenso speed 6, going for 300rwkw
-FZR 250- run around bike

Top
 Profile  
 
 
Posted: Wed Jul 06, 2005 9:35 pm 
Stock as a Rock
Offline

Age: 36

Posts: 144

Joined: 9th May 2005

Ride: xf

Location: gosford
NSW, Australia

i have no idea how much i want for them because i havnt used them and hence i cannot tell what condition they are in...
but the fuel pressure reg is rising rate (it has a hose that goes to manifold to rise rate with rising manifold pressure)
because i have no use for these items i did not research them and have no info on them when i get the chance i will try to get to a carby/EFI place and get some info and possibly a test??? (dunno if you can do that but meh)
umm as for price i guess just make an offer i have already had some PM's that i have sent amounts to but i guess just send me your offer and i will consider/ send PM back
sorry that im not much help with details but thats why im not looking for much in the price region
cheers
Top
 Profile  
 
 
Posted: Fri Jul 08, 2005 7:26 pm 
Stock as a Rock
Offline

Age: 36

Posts: 144

Joined: 9th May 2005

Ride: xf

Location: gosford
NSW, Australia

sorry above i said charged... i meant charred (slight charcoal/burn mark)
cheers
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 9 posts ] 

Who is online

Users browsing this forum: No registered users and 32 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Nov 22, 2024 1:32 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names