I have a au 4.0 running the vortech v2 on 9 psi if my pcv is not connected right will this cause my dipstick to pop out on boost 9 psi

Can any 1 help us out with the right way to run the pcv valve would be great

The pcv should be connected to the inlet manifold. Get an XR6T check valve and fit that to the hose. Do you have a catch can?? Crankcase should be under constant vacuum, so run a hose from the intake side to the can, and one to the rocker cover...



If it still blows out, then you have to much blow-by, and should rebuild the donk.....

Cheers

Daz