|
| CHEF |
|
|||
|
Its probly been covered somewhere here but I thought Id ask...
If I put my ea head onto my ED bottom end will the comp ratio be lower than the stock ED motor? And what is the comp ratio of EA EB and EDs? cheers y'all |
|||
| Top | |
|||
| EBXR8380 |
|
|||
|
The compression would be higher...EA's have slightly more dish in piston and smaller combustion chamber volume..
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| Marmo aka GRNGOB |
|
|||
|
so if u put an ed head on the ea block it would be lower then?
_________________ Spooling soon... |
|||
| Top | |
|||
| CHEF |
|
|||
|
{USERNAME} wrote: The compression would be higher...EA's have slightly more dish in piston and smaller combustion chamber volume..
ah ok, I'll stick with the stock ED motor for the time being... later i will put something stronger together, Id like to use the full potential of my turbo |
|||
| Top | |
|||
| Bert |
|
||
|
If you remove the swirl vane in the EA head that should lower the compression by at least 1/2 a point.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 37 guests |
