|
ebgun92 |
|
|||
|
i was just thinking if i was to use a dizzy set up with a wolf3d on a eb, would i be better of using a cpfi one as the teeth inside are the same or not? also if i was using that and that was a single pulse set up how does the wolf no what injector to open. and i surpose i'd need to use a bosch ingnitor but what do the 3 terminals from the dizzy hook up to?
_________________ eb fairmont manual, garrett t4, turbo built engine, decomnp pistons 8.3-1, 3.23lsd, wold3dv4, supersuper lows, linelocker, |
|||
Top | |
dynowog |
|
||
|
ebgun92 wrote: i was just thinking if i was to use a dizzy set up with a wolf3d on a eb, would i be better of using a cpfi one as the teeth inside are the same or not? also if i was using that and that was a single pulse set up how does the wolf no what injector to open. and i surpose i'd need to use a bosch ingnitor but what do the 3 terminals from the dizzy hook up to?
can be easily done most of the dizzy's are the same inside i use a combo of xf plug (tfm eliminator) and later dizzy so as to eliminate the thick film module then is a matter of hooking up the 3 wires as per your manual or we can do it for you if in melb. |
||
Top | |
ebgun92 |
|
|||
|
i've been told i need a modified disc in the dizzy for it to work with the wolf, is this right?
_________________ eb fairmont manual, garrett t4, turbo built engine, decomnp pistons 8.3-1, 3.23lsd, wold3dv4, supersuper lows, linelocker, |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 26 guests |