I a few turbo's and they are either Master power through N.Z
Or Precision from U.S...
Master Power through
www.frantik.co.nz
For those who are not too sure about
there reliabilty check this link..
http://www.theturboforums.com/smf/index ... ic=74174.0

BUT just use postal service ...
Pag parts for other turbo's
sales@pagparts.com


Another I have bought through
http://www.vsracing.net/


Or Hung yes Hung at

miketurboinc@bellsouth.net Or
http://www.dallasturbo.com/
The U.S turbo's turbo's especially Precision are higher flowed
than what we can get here off the shelf... Especially in my case where I
wanted two good turbo's for a V8...T 3/4 hybrids....From Pag parts...

ok guys.... my short motor is back from the builders, ready for my heads and manifold... I want to run a T04E, and im seriously looking at the master power turbos... im only going to ever run a max of 10psi, and my driving style isnt that aggressive... engine is stock stroke... any opinions on the TO4E for this use?

T60 is close to XR6T turbo with antisurge housing..
http://www.frantik.co.nz/Products/T-60/masterpower.htm

T 64 with .96 A.R .....Like the anti surge housing. Similar to T04Z..
http://www.frantik.co.nz/Products/T-64/masterpower.htm

The T70 would work too...
http://www.frantik.co.nz/Products/T-70/masterpower.htm