|
| He[X]eN |
|
|||
|
Found this on Ebay. Anyone used one before? Seems like a really simple mod giving good power increase!
http://cgi.ebay.com/ebaymotors/ws/eBayI ... ename=WD2V
_________________
|
|||
| Top | |
|||
| bowsaw |
|
|||
|
Seen these before, smaller ones, waste of money if it operates ont he same principle as others i have seen. 30/40 rwhp for 129 bucks?????? dont think so. Another rice boy gadget.
|
|||
| Top | |
|||
| Andrew J |
|
|||
|
Well if you have a good read of what it says, youll think again. Basically they say that it works on 4, 6, and 8 cyclinder motors, but only works good on 4 and 6 cylinders. So one would think that it wouldnt produce enough air for an 8 cylinder. It also says that it produces 1200 cubic feet of air, but doesnt give a time it take to produce it. And our inline 6's use 2 litres of air every single time they turn over if it was a perfect VE (volumetric efficiency) Due to the nature of the intake ports and friction, the VE would not be 100%, but rather somewhere around 85% max. Even so, thats still 1.7 litres of air every revolution, or 8500 litres a minute at 5000rpm, or just over 8.5 cubic metres. Reverting back to our 1200 cubic feet, and knowing that one cubic foot is equal to 0.02832 cubic metres, we see that it produces a whopping 34 cubic metres of air. ( we still dont know how long it takes to produce this amoun of air) However, this is at 0 pressure. So one would think that the most this could do, is eliminate vacumm in the inlet piping, and possibly be a restriction. And as for it being able to give an increase of up to 40 rear wheel horsepower? I dont think so, but give me a dyno chart from a reputable dyno, and ill gladly eat my words.
_________________ The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself?
|
|||
| Top | |
|||
| bombed EA |
|
||
|
Dont need to read all the blurb, that they print, that sort of gain, for that price, isnt possible.
_________________ GET STUFFED |
||
| Top | |
||
| 4.9 EF Futura |
|
|||
|
The theory is sound, but the application is another story.
These fans would potentially create boost in a very small engine. But for anything with a respectable capacity the airflow requirements will be far too great. Boost is a function of static pressure and flow. A 5.0L V8 will use approximately 500cfm of air at 6500rpm so i'm told. I would imagine a 4.0L I6 would not be too far behind this. As im sure you can appreciate, this exceeds anything a small fan is acapable of producing.
_________________ I promise..... I will never die. |
|||
| Top | |
|||
| CHEF |
|
|||
|
If your dumb enough to buy that, you shouldnt be driving a stang... Hyundai maybe
|
|||
| Top | |
|||
| Interceptor |
|
||
|
would probably work well on a lawnmower engine.....
_________________ Banned |
||
| Top | |
||
| EBXR8380 |
|
|||
|
Interceptor wrote: would probably work well on a lawnmower engine.....
Now ther's an idea!!! It can double up as a blower to clean gutters, footpath etc.... Edit I'd like to see how much it flows at 27 inch pressure ?...NON !!!!
_________________ As in ZOOM 126 edition Last edited by EBXR8380 on Wed Jan 12, 2005 3:05 pm, edited 1 time in total. |
|||
| Top | |
|||
| Interceptor |
|
||
|
isnt that giving it a lil too much credit?
_________________ Banned |
||
| Top | |
||
| mikejh |
|
||
|
AIR FILTER NOT INLCUDED ! - Just as well - even that wouldn't flow enough to feed my lawnmower.
LOW CURRENT DRAW - My a*** - if it is it wouldn't even be good for blowing leaves out of the gutters. 1200 CFM - What a laugh !!! maybe unloaded in free air, put any back pressure on it and it'll be about 2 cfm. |
||
| Top | |
||
| Epitome |
|
||
|
Andrew J wrote: Well if you have a good read of what it says, youll think again. Basically they say that it works on 4, 6, and 8 cyclinder motors, but only works good on 4 and 6 cylinders. So one would think that it wouldnt produce enough air for an 8 cylinder. It also says that it produces 1200 cubic feet of air, but doesnt give a time it take to produce it. And our inline 6's use 2 litres of air every single time they turn over if it was a perfect VE (volumetric efficiency) Due to the nature of the intake ports and friction, the VE would not be 100%, but rather somewhere around 85% max. Even so, thats still 1.7 litres of air every revolution, or 8500 litres a minute at 5000rpm, or just over 8.5 cubic metres. Reverting back to our 1200 cubic feet, and knowing that one cubic foot is equal to 0.02832 cubic metres, we see that it produces a whopping 34 cubic metres of air. ( we still dont know how long it takes to produce this amoun of air) However, this is at 0 pressure. So one would think that the most this could do, is eliminate vacumm in the inlet piping, and possibly be a restriction. And as for it being able to give an increase of up to 40 rear wheel horsepower? I dont think so, but give me a dyno chart from a reputable dyno, and ill gladly eat my words.
Andrew Air flow into an engine is not high. Take the dragster as an example. We rev the 468 cube big block to 6100rpm and do so through a 950cfm carb. 468 cubic inches is 7675.2 cc's or 7.68 litres. If you take a VE of 85% for it, it would suck in 6.5 litres of air every second revolution (4 stroke engine remember). That would be 19825 litres per minute at 6100rpm. We need 19.825 cubic metres of air per minute, which is (19.825 x 35.3) 699.8cfm. The 4.0 motor you refer to needs 300cfm. If this device (which probably doesn't work) can move 1200cfm then it is "capable" of supplying 4 times as much air as the 4.0 motor needs. Having looked at the item on ebay, I see that they claim it makes 5psi of boost. I doubt it. The thing is that these devices are great in theory but in practice never work. I guess we can all dream though. 5psi of boost for $125us. That would be nice wouldn't it??
_________________ Kel. |
||
| Top | |
||
| elusiverunner |
|
|||
|
Read a magazine article on this sort of so called supercharger a couple of days ago. The thing uses two computer case fans running wide open. These wouldn't last long and would hardle supply enough air to power a "putt-putt" boat in calm water.
The guy is a non registered user on eBay. I would certainly give hime a wide berth. 
Last edited by elusiverunner on Sun Jan 23, 2005 3:30 pm, edited 1 time in total. |
|||
| Top | |
|||
| XRFan101 |
|
|||
|
I saw something similar to this ages ago. Now i dont want to be a smartass or ne thing but, has ne one actully used something like this on thier car just for aguments sake?
Or just to say yes i tried it and yes its the biggest scam out there 
If it were $50 cheaper i would buy it just so i can test it on the dyno, and say yes its been tested down here and either give it a yay or nay. So its like $120+ not including all the other fees and buying the filter, so your prolly gonna be paying like $30-$50 more to get it over here. So roughly $180 at the most..... F**k that!! if it were cheaper then i would try it. It has a lifetime warrantee too, but as if thats gonna be ne help to someone who buys it down here. 
My 2 cents
_________________
|
|||
| Top | |
|||
| Epitome |
|
||
|
elusiverunner wrote: Read a magazine article on this sort of so called supercharger a couple of days ago. The thing uses two computer case fans running wide open. These wouldn't last long and would hardle supply enough air to power a "putt-putt" boat in calm water.
The guy is a non registered user on eBay. I would certainly give hime a wide berth. You're actually referring to a different "supercharger" device that we've seen here before. The device on the link above is somewhat larger than that and has a single large motor driving it.
_________________ Kel. |
||
| Top | |
||
| Macca |
|
|||
|
Epitome wrote: elusiverunner wrote: Read a magazine article on this sort of so called supercharger a couple of days ago. The thing uses two computer case fans running wide open. These wouldn't last long and would hardle supply enough air to power a "putt-putt" boat in calm water. The guy is a non registered user on eBay. I would certainly give hime a wide berth. You're actually referring to a different "supercharger" device that we've seen here before. The device on the link above is somewhat larger than that and has a single large motor driving it. But it would be still rubbish, it basically looks like a heater blower from an old car or aftermarket blower, hmm might be good enough for a lawn mower, even then I have my doubts.
_________________ 93 Ford Maverick LWB automatic petrol guzzler (gets stuck where Deli doesn't, big pumpkins |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 15 guests |
-BF MKII XR6 Turbo in EGO-
)