hey guys im new here and i would like to turbo my ef falcon can anyone give me a list off wat i have to do eg eb bottom end ect i need a whole list as im saving up to do this and ill also be geting a loan to help me out and wat i have to do to the inetranls off the motor cheers trent ps i would like to run a 12sec pass

turbo gt3540 $1600+
turbo manifold $1000-/+
intercooler 600x300x75 $400-/+
wastegate(if not internal) 38mm or 45mm $600+
injectors 440cc or bigger $600+
fuel pump 600hp or bigger $150+
regulator $150+
ecu $1100+
bov $200+
intercooler piping $200+
3' exhaust $300+
dump pipe 3' or 3.5' $100+
camsharft $250+
gauges oil presure and boost $200
shift kit for auto $20+
clutch for manual $dunno
tune $250+
oil lines $ 100+
weld oil fitting into the sump $ 50+
others that ul find $200+
head spacer or 2 au head gaskets 9.1comp or lower $ 150+

probly cost you $7500 and more

i dont think that the bottom end will need to be tuched

and make that 10 k if your getting it done by someone

If you research into it a lot, are handy with your hands, have access to decent welder, and patient for a good bargin then you should be able to do it as cheap as $3500 using mostly 2nd hand parts and the stock unopened motor. $4500 if majority new parts on the std motor. This should "just" get you outside the 12's reliably provided the motor is healthy.