|
Saiken |
|
||
|
Hey,
wondering how hard it is to get an engineer cert. for a petrol turbo car in victoria(mexico ) and what price range i should be looking at. thanks
_________________ Cobra Motorsports |
||
Top | |
gryph |
|
|||
|
Will be interested to see this reply.
|
|||
Top | |
Saiken |
|
||
|
bump
_________________ Cobra Motorsports |
||
Top | |
EFFalcon |
|
|||
|
Emmissions Testing = $1600ish
ENgineers cert = $600-800 Tuning required to pass emmisions testing Tuning to put car back to its 'performance' spec. doing lots of research before you do anything will help. speak to a performance shop and see if they can help with the tuning and getting it all setup. dunno how easily it'd pass emmisions, i'd imagine you'd have to run stock cam, low boost and a very specific tune.
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
Top | |
Saiken |
|
||
|
thats what i was thinking
_________________ Cobra Motorsports |
||
Top | |
Big Kev |
|
|||
|
{USERNAME} wrote: Emmissions Testing = $1600ish
ENgineers cert = $600-800 Tuning required to pass emmisions testing Tuning to put car back to its 'performance' spec. doing lots of research before you do anything will help. speak to a performance shop and see if they can help with the tuning and getting it all setup. dunno how easily it'd pass emmisions, i'd imagine you'd have to run stock cam, low boost and a very specific tune. depeending on state...i retty sure this is NSW/ACT is free or very close to it....however ive heard of people having to pay 3K in VIC for emissions testing so be wary
_________________ For Sale: 25 Farad Rockford Fosgate Competition Series Carbon Cap, more to come - pm me if interested |
|||
Top | |
EFFalcon |
|
|||
|
Big Kev: take a look at the thread title
its about Victoria i've heard the magical $3k mark spoken about a lot, but the actual price we were given was $1600.
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
Top | |
Saiken |
|
||
|
any recommendations of places to go EFFalcon?? or anyone else who has enquired or had to get one?
_________________ Cobra Motorsports |
||
Top | |
EFFalcon |
|
|||
|
We spoke to Dynomotive in bayswater, they were very helpful about it.
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
Top | |
WindeX |
|
||
|
Couldent you run two cats? Or something similar to ease filter out more nasties? Or am I just tripping. If you got a section welded in to allow you to bolt a straight pipe in there afterwards you could get your performance back... and then it still looks nice and legal because you will still be running one cat on the street afterwards.
|
||
Top | |
Shum's EL |
|
|||
|
i'll have a hunt round bendigo and see wat i can come up with
|
|||
Top | |
Saiken |
|
||
|
Can you check out what they say about petrol cars as well as Gas **noticed your running a gas falcon and they are a cheaper to get engineered if you run it straight gas as you dont have to do emissions testing or something**
_________________ Cobra Motorsports |
||
Top | |
Shum's EL |
|
|||
|
{USERNAME} wrote: Can you check out what they say about petrol cars as well as Gas **noticed your running a gas falcon and they are a cheaper to get engineered if you run it straight gas as you dont have to do emissions testing or something**
yeah alright.. thats the plan to go straight gas turbo for me |
|||
Top | |
concorde |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: Emmissions Testing = $1600ish ENgineers cert = $600-800 Tuning required to pass emmisions testing Tuning to put car back to its 'performance' spec. doing lots of research before you do anything will help. speak to a performance shop and see if they can help with the tuning and getting it all setup. dunno how easily it'd pass emmisions, i'd imagine you'd have to run stock cam, low boost and a very specific tune. depeending on state...i retty sure this is NSW/ACT is free or very close to it....however ive heard of people having to pay 3K in VIC for emissions testing so be wary its $500 just to get a basic engineers cert for wheel adapters. there is no way an emissions test would be free or even close to it. this is where engineers make massive dollars off modified cars.
_________________ 2nd Place Summernats19 SQ Comp, Street Pro 0-600 Class
|
|||
Top | |
EFFalcon |
|
|||
|
{USERNAME} wrote: its $500 just to get a basic engineers cert for wheel adapters. there is no way an emissions test would be free or even close to it. this is where engineers make massive dollars off modified cars.
He's actually right, in NSW the emmisions test is free, but it is a slightly different test to what gets done in Vic. in QLD its not requried at all. only the southern states get screwed over on emmisions testing pricing.
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 34 guests |