Does anybody know how much the APS phase 2 and phase 3 kits cost for BA XR6T? Any help would be much appreciated!

Cheers,

Matt

i wouldnt bother with an APS kit if i were u mate, they still use the UNICHIP afaik.
depending on what sort of power u r after, best bet is to get a bigger intercooler, some bigger injectors, a high flow cat and a custom tuned edit and probably valve springs if u want to go above 300rwkw. your trans will also need a strengthen (if auto) or a stronger clutch (if manual).

but to answer your question, an APS phase 2 kit was around the $4000-4500 dollar mark, pretty sure that was fitted and tuned.

You should be able to find an APS dealer that will do a custom tune with a flash tuner as opposed to the unichip.
Interestingly, the only australian dealer on the APS site with a "tick" for XR6T, is autotech in sydney
G&D in cranbourne are listed as are dynomotive in baysie and APS itself in croydon.
http://www.airpowersystems.com.au/aus_spec/aus_dealers.htm

Big reason to go the APS kits IMO is the fact they are ADR approved and emissions legal.
Good for in 10 years time when XR6Ts start copping EPAs like VLTs do now LOL