|
| PSI Taxi |
|
||
|
hi guys just looking into a better coil for ea/ eb multipoint 6cyl does anybody know who does one
p/s psitaxi booked in for boost up to 20 t0 22 psi on 1st of august last attempt 2 months ago failed due to dogy fuel pump had to stop at 14.5 psi but was lookin good will run big pod filter [ ditchen the standed air box ] and removin rear half of the exshaust hopen for 350+ rwkw |
||
| Top | |
||
| EBXR8380 |
|
|||
|
Get an MSD 6AL2 http://www.youtube.com/watch?v=DT2clNrxOuM
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| TURBO_GHIA |
|
|||
|
http://www.ebay.com.au/itm/MSD8253-HVC- ... 53e80933fc
_________________ HMMMM BOOST !!!
|
|||
| Top | |
|||
| ausedwagon |
|
|||
|
i have a related question, im going to be running 9psi max of boost into a au motor with a supercharger, do i need to or should i upgrade my coil?
will i need the whole msd stuff around or just plug in a larger coil?
_________________ {DESCRIPTION} |
|||
| Top | |
|||
| GeZza200 |
|
||
|
Go ICE, Aussie made...
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| PSI Taxi |
|
||
|
has anybody fitted any of the above products to there ea/ eb mutipoint , what would be the cost of fitting these, do anybody do a basic plug n play upgrade
cheers |
||
| Top | |
||
| TROYMAN |
|
||
|
{USERNAME} wrote: i have a related question, im going to be running 9psi max of boost into a au motor with a supercharger, do i need to or should i upgrade my coil? will i need the whole msd stuff around or just plug in a larger coil? im sure there must be an advantage from better spark at some point.. i can go as high as 17-18psi before i get spark issues with the std coil.. wether or not i would actually get more power or better efficiency from upgrading the coil is something that i would be interested in?? |
||
| Top | |
||
| TURBO_GHIA |
|
|||
|
i did a back to back test of both a standard coil and msd coil , same dyno same time same day , did one run with standard coil and then swapped coil in a matter of 1 min and i gained 10kw from the msd. so yeah i think theres a benifit with changing them .there just plug and play , just need to change the wiring from the ev1 plug to to wires
_________________ HMMMM BOOST !!!
|
|||
| Top | |
|||
| PSI Taxi |
|
||
|
hey guys just got a ICE 4200 pro series coil for my ea just need to cut factory plug off and fit some eyelet terminals
i too think there are some minor gains to be had down low [low boost] but as i am going for 20 - 22psi on wednesday i am confident i will have good spark at these boost levels where the standard coil would fail to deliver a strong spark . i will let u know how it all goes on wednesday cheers for your input |
||
| Top | |
||
| PSI Taxi |
|
||
|
turbo ghia ,what boost were you runnin on that day how much rwkw
|
||
| Top | |
||
| TURBO_GHIA |
|
|||
|
9psi and 225rwkw psi pop
_________________ HMMMM BOOST !!!
|
|||
| Top | |
|||
| PSI Taxi |
|
||
|
cheers
|
||
| Top | |
||
| EBXR8380 |
|
|||
|
If your runing after market ECU ??
G.M coils can take some power.. They run at higher dwell, more spark.. Have built in igniters too..
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| MAD |
|
|||
|
The MSD Streetfire CDI (5520) is perfect for these cars as all it does is boost the spark and add multi-spark. It leaves the timing to the ECU, which is fine these days with the J3 chips so plentiful now and so many shops with the ability to tune them.
|
|||
| Top | |
|||
| EBXR8380 |
|
|||
|
I have used MSD in the past but latley I have found the
quality of there low end products wanting.. Chassing an ignition miss for some time.. Then went wasted spark, did away with MSD .. Cured my ignition issues... The digital ign seems o/k...
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 25 guests |
