|
| ACIDIC |
|
||
|
i know this may have been answerd somewhere along the line, but, i'm not reading through how ever many post are here.
My question is, how much can a stock EF i6 take? i own a GLi that i'm doing up and would like to put a turbo on the side, but do i really need to rebuild it? i'm not a thrash around driver get up it here and there, so how long would it last, if the power was only 220-240kw? ACIDIC
_________________ 96 R33 Skyline |
||
| Top | |
||
| drft_au |
|
||
|
depends how many k's it's done but at a guess 8 to 10 month's maybe on 6 to 9 psi ......i would probly run on 6 psi as a starting point
my advice would be to install a aftermarket ecu and run the f**k really rich.....don't let it lean out or it will go BANG !!! let us know how ya get on
_________________ why go fast in a str8 line .......when ya can slide fast !!!!!!!! |
||
| Top | |
||
| fritzz |
|
|||
|
if tuned right they will last for eva. ive done ova 20,000kms in my el. 10,000 of that was at 6-8psi on standard ecu. and the other 10,000 of it has been at 13psi with the autronic which has never been tuned properly. its making aprox 240-260rwkw and is a every day driver. it often sees the limiter. the engine is just starting to drop comp a little. im on my 2nd auto trans and 3rd diff.
_________________ # 1997 EL Falcon GLI - 600+rwkw |
|||
| Top | |
|||
| ACIDIC |
|
||
|
so, if i have an EF thats done, say 240 000km, it's touch and go?
i don't want the boost too high, i just put a 5 speed in it and it goes quite hard now, so i only want a touch more power just to top it off. i'm looking at putting an XR8 diff in it, strut braces, sway bars etc. The exterior is done except a body kit, just want to complete the job, but at the right price. ACIDIC
_________________ 96 R33 Skyline |
||
| Top | |
||
| Molloy |
|
|||
|
A good tune and all will be sweet,
_________________ SS Inductions CAI, K&N Filters, M-spec FMC, Turbosmart BOV, 8psi capa tune, X-force cat. |
|||
| Top | |
|||
| Jim Beam |
|
|||
Age: 35 Posts: 3505 Joined: 1st May 2005 Ride: EB Fairmont Location: Northern Suburbs, Adelaide |
{USERNAME} wrote: so, if i have an EF thats done, say 240 000km, it's touch and go?
i don't want the boost too high, i just put a 5 speed in it and it goes quite hard now, so i only want a touch more power just to top it off. i'm looking at putting an XR8 diff in it, strut braces, sway bars etc. The exterior is done except a body kit, just want to complete the job, but at the right price. ACIDIC Your gearbox will bust before your engine will. On a good tune that is.
_________________ Doin it for Scotty. |
|||
| Top | |
|||
| EBXR8380 |
|
|||
|
Fit turbo etc to wreckers engine the drop the whole lot in..Even better buy an A.U engine and use your engines inlet, ignition etc.. AU engines [a little more with auto] are around $600 with low kls.... These engines take 300 rwkw all day with good tune... BTW the timing is just as important as fuel delivery and 11.7 afr is about right...With 12 Lb on our engine we are runing 18* total advance at peak torque... 12 /15 Lb is easy obtainable with 9.2 compression which is what A.U's run.. Its very streetable and extremely throttle responsive...Especially with T04z - .84 A.R turbo....
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| RuchEa |
|
||
|
{USERNAME} wrote: depends how many k's it's done but at a guess 8 to 10 month's maybe on 6 to 9 psi ......i would probly run on 6 psi as a starting point
my advice would be to install a aftermarket ecu and run the f**k really rich.....don't let it lean out or it will go BANG !!! let us know how ya get on Yeh coz running it real rich is good for engine life too!!! Better to PROPERLY match the AF ratio not guess it!
_________________ EB XR6 project almost complete!
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 34 guests |
