Rising Rate Regulator - www.fordmods.com

Home » Forums » Fordmods Tech » Forced Induction Workshop

Rising Rate Regulator

Page 1 of 1 [ 7 posts ]

Post New Topic Post Reply

Previous topic Next topic

BlacklistedXR

Post subject: Rising Rate Regulator

Posted: Tue Nov 11, 2008 3:18 am

Parts Gopher

Offline

Age: 35

Posts: 57

Joined: 7th Jun 2007

Ride: AU XR8 220

Location: Perth
WA, Australia

I am piecing together the final parts to get my AU XR8 supercharged and i am stuck on the fuel pressure regulator. I have got a V2 SC Trim that will be going on it and i will be running it at about 12psi and raising it to 14psi down the track.
What rising rate fuel pressure regulator should i get that will support my blower? I am hoping for about 400rwhp+.
I dont mind spending a bit of $$$ for a good quality one with a gauge so any reccomendations would be very helpful.
Thanks

Top

Profile

Steady ED

Posted: Tue Nov 11, 2008 6:27 am

Fordmods Addict

Offline

Age: 38

Posts: 7958

Joined: 1st Jun 2005

Gallery: 13 images

Ride: Falcon

Power: 237 rwkw

Location: Melbourne
VIC, Australia

What ECU?

_________________

ED XR8 Sprint - S-Trim, V500, 249rwkw
BF MKII F6 Tornado - 237rwkw

Top

Profile

TerroristGHIA

Posted: Tue Nov 11, 2008 1:28 pm

Getting Side Ways

Offline

Age: 53

Posts: 3763

Joined: 25th Nov 2004

Gallery: 6 images

Ride: EFII 5.8 NOS TerroristGhia

Power: 274 rwkw

Location: Sydney Australia
NSW, Australia

Try this fuel rail kit, comes with a mallory adjustable reg, and well worth the effort

http://store.summitracing.com/egnsearch ... 5&y=9&x=24
Brett

_________________

The Terrorist ED Retired due to RUST.
The TerrosistGhia, EF Ghia 351 EFI 5 Speed.
Millennium Falcon, Sleeper EL DOHC 6 Speed Manual EFI LPG
Member#1131
I didn't Vote for Multiculturalism, DID YOU!!!

Top

Profile

schnoods

Posted: Tue Nov 11, 2008 1:59 pm

Getting Side Ways

Offline

Age: 40

Posts: 2057

Joined: 25th May 2006

Ride: ef xr8

Power: 229 rwkw

Location: Perth
WA, Australia

I would go with the aeromotive fuel pressure regulator, bolts in to the stock fuel rails no problems.

_________________

Because of Beer, Thirst is a Beautiful Thing!

'95 EF XR8 auto, Advance headers, 3" exhaust, Cobra manifold, BBK 75mm throttle body , 80MM Marauder MAF, Vortech V2 T Trim , 307 rwhp, 405 ft/lb 13.2 @ 105 MPH

Now N/A (permanent Lag) - AFR 165's, Comp XE270 cam, 1.6 RR - 269 rwhp 14.1 @ 102mph.

Top

Profile

BlacklistedXR

Posted: Tue Nov 11, 2008 5:20 pm

Parts Gopher

Offline

Age: 35

Posts: 57

Joined: 7th Jun 2007

Ride: AU XR8 220

Location: Perth
WA, Australia

Im running a Ford Flash Tuner 2.
Schnoods can you give me a link or a part number to the aeromotive regulator your talking about. Ive had a look at them and they look good but i dont know which one would bolt up alright on the XR.

Top

Profile

Steady ED

Posted: Tue Nov 11, 2008 5:27 pm

Fordmods Addict

Offline

Age: 38

Posts: 7958

Joined: 1st Jun 2005

Gallery: 13 images

Ride: Falcon

Power: 237 rwkw

Location: Melbourne
VIC, Australia

Speak to your tuner, and find out what reg they recommend you run.
I would say being MAF based you should be fine with a 1:1 (not rising rate) reg, but it's better to be safe then sorry.

_________________

ED XR8 Sprint - S-Trim, V500, 249rwkw
BF MKII F6 Tornado - 237rwkw

Top

Profile

badcooky

Posted: Sun Dec 07, 2008 1:10 am

Getting Side Ways

Offline

Posts: 631

Joined: 27th Jan 2007

Ride: Supercharged BA XL ute

Location: Gordonvale
QLD, Australia

XR6T reg might be the go i'd reckon.

_________________

BA XL ute.
P'maker headers',Hi flow cat,3" sports sytem,
Raptor V-clutched lightweight not intercooled,no tranny cooler,no worries.

Top

Profile

Post New Topic Reply

Page 1 of 1 [ 7 posts ]

Jump to:

Home » Forums » Fordmods Tech » Forced Induction Workshop

Who is online
Users browsing this forum: No registered users and 14 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

It is currently Mon Dec 23, 2024 6:15 pm

All times are UTC + 11 hours