|
| HiBoost |
|
||
|
do i have to run-in the turbo? how do i Run-in the turbo?
_________________ 4LTR-JET: 9.1 @150mph!! |
||
| Top | |
||
| Dansedgli |
|
||
|
Not that I know of.
You are supposed to hold the blades still while you crank the motor so oil runs through the turbo before you let it spin. But other than that the garret thing I got with my turbo didnt say anything else was necessary. |
||
| Top | |
||
| glenneaux |
|
||
|
{USERNAME} wrote: Not that I know of.
You are supposed to hold the blades still while you crank the motor so oil runs through the turbo before you let it spin. But other than that the garret thing I got with my turbo didnt say anything else was necessary. I heard you had to wind the boost upto 22psi and dose HARD |
||
| Top | |
||
| twr7cx |
|
|||
|
Capa make you run in there blowers if that's any help. have to keep the engine at low rpm for a while.
|
|||
| Top | |
|||
| EBXR8380 |
|
|||
|
At first start up i disconnect the oil return pipe, start the engine and let idle... No rpm till oil starts coming out oil return line...Pays to be sure oil is circulating before any rpm or boost..To be sure...!!!! Oh and reconnect oil return line...
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 45 guests |
