|
| clampy |
|
||
|
any one fitted one of these to a el ford falcon or falcon before??
http://cgi.ebay.com.au/JDM-SC14-Ford-Ho ... 58857cb00e
_________________ EL Futura 5 speed factory:PH47FL goneeeee |
||
| Top | |
||
| frankieh |
|
|||
|
Don't waste your time.. it doesn't have enough puff to feed a 4lt... M90 should be the minimum.. and m112 even better.
|
|||
| Top | |
|||
| clampy |
|
||
|
so not been done before or any other cheap supercharger been done b4???
_________________ EL Futura 5 speed factory:PH47FL goneeeee |
||
| Top | |
||
| milo 302 |
|
||
|
In the beginning castlemaine rod shop sold kits with these toyota blowers for the 250 xflow for 1800 complete, they were recommended to be fitted to a stock crossflow making about 80-90 fwkw to give it a slight boost.
Not suitable for a 4.0, you would make more power with a cam, exhaust and intake/tune. Unless you own a workshop and are able to acces machinery or are at least a mechanic, cheaper is almost always heartache. |
||
| Top | |
||
| clampy |
|
||
|
got cam and every thing ill just use money on getting a better cam and vernier gear.
_________________ EL Futura 5 speed factory:PH47FL goneeeee |
||
| Top | |
||
| big dell |
|
||
|
they would work ok as they have 1420 cc per revolution and the m90 has 1500cc per revaluation. but the sc14 will only be good for low down power.
|
||
| Top | |
||
| ebxr82nv |
|
||
|
is the sc14 from the gze corrola motor or the 1gg supra?
_________________ 9/98 AU1 XR6hp-about to retire from the road and be reborn on the race track. |
||
| Top | |
||
| clampy |
|
||
|
as the m90 been put on an el and where do u get brackets?
_________________ EL Futura 5 speed factory:PH47FL goneeeee |
||
| Top | |
||
| paulos |
|
||
|
if youv got all the mods you can get for n/a woudlent this super charger still be worth it??? 500bucks wouldent it give u a nice 30rwkw or something?
_________________ God made s**t, Holden put wheels on it |
||
| Top | |
||
| XR-Lane |
|
|||
|
{USERNAME} wrote: any one fitted one of these to a el ford falcon or falcon before?? http://cgi.ebay.com.au/JDM-SC14-Ford-Ho ... 58857cb00e For around $200 more you can get a m112 off of ebay us. |
|||
| Top | |
|||
| XR-Lane |
|
|||
|
Moved to forced induction workshop.
|
|||
| Top | |
|||
| paulos |
|
||
|
am i right tho this would give a nice 30rwkw down low?
do you think such a small superhcarger would affect the compression of your car if yous ay had some head work done?
_________________ God made s**t, Holden put wheels on it |
||
| Top | |
||
| fairlane6970 |
|
|||
|
put two on
_________________
|
|||
| Top | |
|||
| TROYMAN |
|
||
|
{USERNAME} wrote: if youv got all the mods you can get for n/a woudlent this super charger still be worth it??? 500bucks wouldent it give u a nice 30rwkw or something? yea maybe 30kw down low??? but up top it will become a restriction so you will probably lose power.. |
||
| Top | |
||
| clampy |
|
||
|
any one got any docos on fitting one of these??
_________________ EL Futura 5 speed factory:PH47FL goneeeee |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 6 guests |
