|
| krisisdog |
|
|||
|
As said depends if you want to wait for a BA turbo, and hot that up, or if you want to do it all yourself, and end up with an illegal car (WGAF tho).
I'd go an EF Futura (no bias?), with a snort kit. Could get it sorted, on the road for well under $10k including purchasing the car. |
|||
| Top | |
|||
| Daymoe |
|
||
Age: 33 Posts: 256 Joined: 27th Jan 2008 Ride: WS Ford Fiesta CL manual Location: Melbourne |
krisisdog wrote: As said depends if you want to wait for a BA turbo, and hot that up, or if you want to do it all yourself, and end up with an illegal car (WGAF tho). I'd go an EF Futura (no bias?), with a snort kit. Could get it sorted, on the road for well under $10k including purchasing the car. Hmm, so there are no chances of getting this stuff engineered to be legal? |
||
| Top | |
||
| TROYMAN |
|
||
|
well... mine is engineered with the supercharger!!
|
||
| Top | |
||
| Mr.Kiss |
|
|||
|
Daymoe wrote: krisisdog wrote: As said depends if you want to wait for a BA turbo, and hot that up, or if you want to do it all yourself, and end up with an illegal car (WGAF tho). I'd go an EF Futura (no bias?), with a snort kit. Could get it sorted, on the road for well under $10k including purchasing the car. Hmm, so there are no chances of getting this stuff engineered to be legal? Well in VIC it would be hard and costly to get engineered... safest bet would to go straight gas as well. I got half way through turboing my old EF, was gonna get it engineered and everything, i can find the link to the build thead if ya want.. But then i decided to get a BA XR6T, alot easier to get power out of!! haha plus a newer car is always better 
_________________ My Cars |
|||
| Top | |
|||
| Waggin |
|
|||
|
Is it really much harder to remove a turbo setup compared to a supercharger?
Change exhaust manifold - done! When you install it, just make sure it's all flanged in the right spots so your extractors will bolt straight back up to the cats.
_________________ WAG363: AUII LTD Supercharged 363 Dart Stroker [Supercharged 363 LTD Build] |
|||
| Top | |
|||
| EFFalcon |
|
|||
|
Mr.Kiss wrote: Daymoe wrote: krisisdog wrote: As said depends if you want to wait for a BA turbo, and hot that up, or if you want to do it all yourself, and end up with an illegal car (WGAF tho). I'd go an EF Futura (no bias?), with a snort kit. Could get it sorted, on the road for well under $10k including purchasing the car. Hmm, so there are no chances of getting this stuff engineered to be legal? Well in VIC it would be hard and costly to get engineered... safest bet would to go straight gas as well. I got half way through turboing my old EF, was gonna get it engineered and everything, i can find the link to the build thead if ya want.. But then i decided to get a BA XR6T, alot easier to get power out of!! haha plus a newer car is always better Its not just, just expensive. straight LPG doesn't help that much on a Post87 car anyway.
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| xcabbi |
|
||
|
Injected LPG does. And the new generation systems are supposedly able to support 500+rwKW on a 6 cylinder.
|
||
| Top | |
||
| EFFalcon |
|
|||
|
xcabbi wrote: Injected LPG does. And the new generation systems are supposedly able to support 500+rwKW on a 6 cylinder. I'm referring to legalities. People raved about Straight LPG on pre-VL's and XF's because it was a work around to emmisions laws. post 87 cars still need emmisions testing on LPG, so some of that benefit goes out the door. as for Injected LPG being an option.. its very difficult to justify the ~$4-5k outlay. $4-5k is a lot of coin that could be spent on some other EFI hardware.
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| xcabbi |
|
||
|
What are the rebates like and are they still being handed out?
|
||
| Top | |
||
| MRE-50L |
|
|||
|
why not do both ! as for dedicated gas injection its not possiable without the fuel system as the gas system fires on fuel first till the vehicle warms up enough and then the gas cuts in ......
_________________ Chance Favors The Prepared Mind ! |
|||
| Top | |
|||
| EFFalcon |
|
|||
|
xcabbi wrote: What are the rebates like and are they still being handed out? $1750
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| Daymoe |
|
||
Age: 33 Posts: 256 Joined: 27th Jan 2008 Ride: WS Ford Fiesta CL manual Location: Melbourne |
I've found two possible project cars, both automatic (I want manual, but that can be part of the project right?) a 1991 EB Falcon and a 1996 EL Falcon, $500 and $1900 respectively, what would be the better choice? The EB has paint peeling off its bonnet and roof, plus has that crappy 3.9L motor but it is $1400 cheaper, the EL paint looks alright and has the 4.0, both have 370,000km on them, so I'm guessing an ACL rebuild kit wouldn't go astray, or would I need something much more stronger for a mild turbo/supercharger build? I'm guessing a paint job and motor from a wrecker is going to cost more than $1400 anyways unless I get a backyard job or attempt it myself.
What are your opinions? |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 39 guests |
