|
shoey50 |
|
||
|
are those specs right though??
|
||
Top | |
Steady ED |
|
|||
|
Quote: .63 A/R TURBINE
Turbine Housing is too small, as above. Really only for smaller capacity engines. Because most second hand turbos are off Jap cars, which at the biggest are usually 3 litres, finding a second hand turbo that is going to do well on the Ford six is a bit hard. Like EBXR8380 said, a truck turbo is your best bet. Alot of people have had success using them.
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
Top | |
CHEF |
|
|||
|
Mitsu TDO7's are worth using... Trust mod them up nicely but the basic unit would work well
|
|||
Top | |
shoey50 |
|
||
|
well what is a good size turbine,exhaust housing and all the rest??
|
||
Top | |
CHEF |
|
|||
|
GT40, GT3040, GT3540, TO4e,T4...
Get a Garrett with ARs of 0.6 or 0.7 compressor housing, and 1.04 exhaust housing... ball bearing or plain bearing cores both work well |
|||
Top | |
shoey50 |
|
||
|
this is getting really confusing what about a tco6? i think it is a typo td06
|
||
Top | |
CHEF |
|
|||
|
TCO6 and TDO6 is both different.
TCO6 is very old early 80s unit made by mitsubishi for the starion and cordia... they came in various sizes over the years on these cars and with water cooled and oil cooled cores. Max effient boost was 1bar and on the starion they maxed out at around 160wkws TDO6 is by mitsu again and is a later version of the TCO6, water cooled with better bearings, larger exh wheels and comp wheels and housings... Mitsu made them for the Canter light truck. Trust got there hands on them and modded them for use ( in pairs ) on the GTRs as a hardcore upgrade Both are too small for 4lt... 2 would work well |
|||
Top | |
shoey50 |
|
||
|
arghh im not having much luck (a fair bit to take in all apart of learning though) dont know any one selling one cheap? save me some time pain and stress
|
||
Top | |
CHEF |
|
|||
|
check out ebay, firesport, calias.com, ausrotory... might find a used garrett in the for sales sections
|
|||
Top | |
shoey50 |
|
||
|
i think i know what i need now i will just have to keep an eye out and ask around so just making sure a t3 i think it is of a vl is deffinatly a no go? just to make sure cause i can get one of them no prob at all
|
||
Top | |
shoey50 |
|
||
|
?
|
||
Top | |
Steady ED |
|
|||
|
Unless you're going to use 2 then, then no, it's too small.
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
Top | |
shoey50 |
|
||
|
never any easy way out is there cool thanks for all the help guys
|
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 10 guests |