Hi all im just about to turbo my fairlane skid car i only wanto run 7psi can i get away with running an adjustable fuel reg at 60psi so its rich? I done this with a commodore and it worked for ages. Also wat do i need to do with the pcv vale so it dosnt blow gaskets out

Anything i need to do i would love to know

Thank all

not sure about the reg, but just run the pcv to atmosphere, if its only a skid car.. and gut the pcv so its just like a breather, u will never have an issue.

If PCV is working properly it should be fine.. Esp if its a steel type..You can get booster valve from Jap engine and fit inline to be sure ..
Its the other breather going to inlet from rocker cover.. When boosting.. You will boost crankcase
if you don't disconnect this hose and revert it to air cleaner via catch can..
On a burnout car the big issue is heat !! I would jerry rig a good windscreen wash bottle
and make a water / meth kit to keep combustion temps down..
Colder plugs, gapped to .7mm