|
| JoeXR6 |
|
||
Age: 43 Posts: 387 Joined: 30th Nov 2007 Ride: AU111 XR6 VCT Supercharged Location: Brisbane |
Hi All,
Is there any advantage in having a standard ford fuel pump as a 'lift pump' with an external Walbro, versus just throwing the standard and using a single Walbro in-tank? It's for a supercharged AU I6 with standard in-tank + a stupidly loud external pump. Cheers, Joe
_________________ FOR SALE! - Supercharged AUIII XR6 VCT, intercooled, T5, big brakes.... details in the 'For Sale' section - ford-parts-for-sale-f17/fs-supercharged-au-xr6-vct-series-iii-intercooled-rwc-rego-t114254.html |
||
| Top | |
||
| Steady ED |
|
|||
|
not really.
i'm just running a walbro in-tank, does the job.
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| TROYMAN |
|
||
|
same here im just running the intank walbro, no surge tank or lift pump...
|
||
| Top | |
||
| JoeXR6 |
|
||
Age: 43 Posts: 387 Joined: 30th Nov 2007 Ride: AU111 XR6 VCT Supercharged Location: Brisbane |
Righto so no advantage in having the two pumps.
Do you guys get any noise from the walbro in-tank? I'd assume a walbro intank would be quieter than an external pump in an insulated bracket....? Joe
_________________ FOR SALE! - Supercharged AUIII XR6 VCT, intercooled, T5, big brakes.... details in the 'For Sale' section - ford-parts-for-sale-f17/fs-supercharged-au-xr6-vct-series-iii-intercooled-rwc-rego-t114254.html |
||
| Top | |
||
| TROYMAN |
|
||
|
imo the only advantage of having 2 pumps is if your running a surge tank..
my walbro intank pump is only a tad louder than the std one.. i cant hear it in the car with the engine running... |
||
| Top | |
||
| Steady ED |
|
|||
|
yeah same, can only notice it when it primes, just a little bit louder.
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| EBXR8380 |
|
|||
|
You don't get double the flow fitting an in line pump..
Much better fitting a good in tank.. Then if your after real power 400rwkw and up a surge tank is best to keep fuel up to power level.. Larger fuel lines should be added also... Some cars that have surge tanks etc often are carbed originally.. The std tank doesn't have swirl-pot etc to accept in tank pump...
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| JoeXR6 |
|
||
Age: 43 Posts: 387 Joined: 30th Nov 2007 Ride: AU111 XR6 VCT Supercharged Location: Brisbane |
I'm wanting to avoid surge tank at this point to keep costs down, so if the walbro intanks are quiet they sound like the way to go, particularly if there's no real advantage to running the two pumps. I'll grab one from private9 of boostedfalcon.
EBXR8380 wrote: You don't get double the flow fitting an in line pump.. Much better fitting a good in tank.. Then if your after real power 400rwkw and up a surge tank is best to keep fuel up to power level.. Larger fuel lines should be added also... Some cars that have surge tanks etc often are carbed originally.. The std tank doesn't have swirl-pot etc to accept in tank pump... Thanks for that info Graeme. I was wondering at what stage a surge is actually required. I'm only likely to get at most 250rwkw with pump + 42lb injectors (at 220rwkw now), so a surge tank won't be necessary. Thanks for the help fellas! A walbro intank it is....and hopefully all will be quiet again. Joe
_________________ FOR SALE! - Supercharged AUIII XR6 VCT, intercooled, T5, big brakes.... details in the 'For Sale' section - ford-parts-for-sale-f17/fs-supercharged-au-xr6-vct-series-iii-intercooled-rwc-rego-t114254.html |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 17 guests |
