hi i was just wandering where i get water feed and return on the ba?

im installing a snort kit stage 2 turbo

if anyone could please help that would be great im so lost with this atm... its the only thing stopping me from completing the setup...

hey mate thanks for the kind words

the water lines can be done a few ways however the most common is to take water from the thermostat housing and return into the water overflow bottle ( t piece )

here is a picture os a system we installed which should help

this one you can see how we used a t piece to return to the water overflow

hey mate, well thank you for the awesome, hassle free kit, and THANKS a million for that info now I can complete the kit and get her tuned and up and running.

Would you be able to tell me also what a safe boost level to run would be, and what sort of power out put should i be able to push the na motor and gear box to with out blowing anything up, i have a trans cooler installed and its a new box (about 2 months old).

I was thinking around 7-8 psi and probably between 215 - 230 kw at the tyres, but that's just an estimate guess, any advice you can give would be much appreciated as to how i can get maximum potential out of what I have for now with out blowing stuff up, i know on a stock motor, box and diff, it wont be much, but its a start, i have plans for a strengthened box and valve springs soon but till then whatever advice you can give me would be amazing.

thanks