|
| smiley235 |
|
|||
|
As many know I and many others would love the prospect of boosting our N/A's however have stopped with the barrages of "feasibly impossible advice" - ie: weak N/A internals needing upgrades, Engine management nightmares etc.
However some1 has done it on the bseries forum quite succesfully and cheaply. Just drop in the turbo engine, use the turbo ECU, get ford to flash and link the ECU to your BEM. Then the only weak links to fix up are the dif and driveshaft. Auto can handle the stock power fine. If any1's interested, have a geez: I know of a few keen b-sters lurking, eg: mattathm, doddea etc. http://www.fordforums.com.au/showthread.php?t=115267
_________________ 178.3 rwkw
|
|||
| Top | |
|||
| Mr.Kiss |
|
|||
|
so when are you going to do the conversion
_________________ My Cars |
|||
| Top | |
|||
| 93EB |
|
|||
Age: 47 Posts: 2486 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
is it worth all the hassle dude?
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| smiley235 |
|
|||
|
{USERNAME} wrote: so when are you going to do the conversion when I pay off my loan and credit card. Nah, I want to have a better look into it once my annual leave starts at the end of the year.{USERNAME} wrote: is it worth all the hassle dude?
dude, boost is always worth the hassle!!
_________________ 178.3 rwkw
|
|||
| Top | |
|||
| 93EB |
|
|||
Age: 47 Posts: 2486 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
well may the ford be with you then! good luck when you start the project. if it munches holdens then why not.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| CHEF |
|
|||
|
You can always add all the turbo gear to your existing NA motor. Sure you wont be able to run alot of boost, but there's alot of us that have put 10 or 12psi ( 20psi in my case LOL ) into older Eseries motors without too many blowing up.
For the cost of a XR6t motor, you can have some nice aftermarket gear (injs, intercooler ect ) and run decent power on low boost. Whats the point in buying all the stock gear, when your only going to replace it down the track anyway. I say do it the way the EA-AU guys do it... its all bolt on's |
|||
| Top | |
|||
| smiley235 |
|
|||
|
{USERNAME} wrote: You can always add all the turbo gear to your existing NA motor. Sure you wont be able to run alot of boost, but there's alot of us that have put 10 or 12psi ( 20psi in my case LOL ) into older Eseries motors without too many blowing up.
For the cost of a XR6t motor, you can have some nice aftermarket gear (injs, intercooler ect ) and run decent power on low boost. Whats the point in buying all the stock gear, when your only going to replace it down the track anyway. I say do it the way the EA-AU guys do it... its all bolt on's I know, and the b-series engines were supposed to be tougher than the e-series, but it always seems to be somewhat of a grey area. Most people advise against it, (although most of those people have never actually done it so I suppose the claims are theoretical)
_________________ 178.3 rwkw
|
|||
| Top | |
|||
| Jim Beam |
|
|||
Age: 35 Posts: 3505 Joined: 1st May 2005 Ride: EB Fairmont Location: Northern Suburbs, Adelaide |
{USERNAME} wrote: {USERNAME} wrote: You can always add all the turbo gear to your existing NA motor. Sure you wont be able to run alot of boost, but there's alot of us that have put 10 or 12psi ( 20psi in my case LOL ) into older Eseries motors without too many blowing up. For the cost of a XR6t motor, you can have some nice aftermarket gear (injs, intercooler ect ) and run decent power on low boost. Whats the point in buying all the stock gear, when your only going to replace it down the track anyway. I say do it the way the EA-AU guys do it... its all bolt on's I know, and the b-series engines were supposed to be tougher than the e-series, but it always seems to be somewhat of a grey area. Most people advise against it, (although most of those people have never actually done it so I suppose the claims are theoretical) Personally I'd go with bolt ons then when/if the engine blew I'd build it properly. Its not like you wouldnt have to with an XR6T motor anyway.
_________________ Doin it for Scotty. |
|||
| Top | |
|||
| CHEF |
|
|||
|
Yeah exactly... once its up and getting good power you always start wanting more, so doing rods/pistons ect on the existing NA isnt a drama
|
|||
| Top | |
|||
| smiley235 |
|
|||
|
very good point. engine management in this case would require after market. The question is how easily aftermarket can link up with the other car modules and if things such as VCT can be controlled. Just out of interest, would it be a good choice to use the gt 35/40 like the xr6t's or something better. And compression would be a bit high in the n/a motors.
_________________ 178.3 rwkw
|
|||
| Top | |
|||
| Jim Beam |
|
|||
Age: 35 Posts: 3505 Joined: 1st May 2005 Ride: EB Fairmont Location: Northern Suburbs, Adelaide |
{USERNAME} wrote: very good point. engine management in this case would require after market. The question is how easily aftermarket can link up with the other car modules and if things such as VCT can be controlled. Just out of interest, would it be a good choice to use the gt 35/40 like the xr6t's or something better. And compression would be a bit high in the n/a motors.
It depends on how much power you want. I think the Garrett GT35/40's are good for 390ish rwkw? T04Z are good for around 450rwkw? GT42R's are around 600rwkw i think. Autronic SM4's can handle VCT. Joe Beninca Beninca Motors 581 Canterbury Road Surrey Hills, Vic, 3127 Ph: (03) 9836 1519 Fax: (03) 9830 1779 David Baillie David Baillie SWA Australia 1/31 Hare Street Shepperton, Vic, 3630 Ph: 0418 597478 Mark Johnson Performance Centre 27 Lipton Dr Thomastown, Vic, 3074 Ph: 94692566 Fax:94692966 Stolen from the Autronic site, they are all the Vic dealers who sell the ECU. Compression is high, if your really worried about that decomp plate FTW until rebuild.
_________________ Doin it for Scotty. |
|||
| Top | |
|||
| CHEF |
|
|||
|
No need to change ECU... use Edit.
I wouldnt bother with the xr6t turbo... the exhaust housing is too small to allow good boost control, not to mention the internal wastegate needs to be enlarged to help it control boost better. Just go for a decent sized GT40 type turbo and a 50mm external wastegate. Grab a used exhaust manifold, mod it to suit the external gate ( it has a T3 flange so that will need work ). 660cc injectors are so so cheap now, a big fmic, piping, intake and 4inch exhaust, walbro in the tank... With good tuning thats gonna be 300wkws on low boost and the motors higher comp will cope... easy and cheapish, but it all used and its cheaper |
|||
| Top | |
|||
| Darkr |
|
|||
|
Can't really use aftermarket ecu with the ba's anyway, the icc and crap wouldnt work.
That's no drama anyway, you can just get the turbo ecu and use that, does everything an aftermarket ecu would. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 9 guests |
