|
| richie |
|
||
|
I checked and tested the recommended crane springs and they werent much chop. The doubles help with any harmonics.
I ended up with Compcam springs #978-16 specs are 126lb@1.85 and 368lb@1.250. Richie.
_________________ 1993 ED F/mont 5.0L, Auto, Edelbrock RPM's, CompCam XE276HR, Crane Gold Race 1.7's, Edelbrock Performer, 75mm T/B, MAP, 42lb , GenIII coils, PH4000's , Twin 2.5", Thermos & underspeeds, 3.7 LSD, 2800 stall and MoTec M800, 372fwhp @ 5400rpm & 387 ft-lb @ 4400 rpm. |
||
| Top | |
||
| richie |
|
||
|
I checked and tested the recommended crane springs and they werent much chop. The doubles help with any harmonics.
I ended up with Compcam springs #978-16 specs are 126lb@1.85 and 368lb@1.250. Richie.
_________________ 1993 ED F/mont 5.0L, Auto, Edelbrock RPM's, CompCam XE276HR, Crane Gold Race 1.7's, Edelbrock Performer, 75mm T/B, MAP, 42lb , GenIII coils, PH4000's , Twin 2.5", Thermos & underspeeds, 3.7 LSD, 2800 stall and MoTec M800, 372fwhp @ 5400rpm & 387 ft-lb @ 4400 rpm. |
||
| Top | |
||
| kato |
|
||
|
Where are u guys sourcing your cams from? (2030,2031) and wat can i expect to pay??
_________________ EF XR8 5spd: 302ci /178rwkw |
||
| Top | |
||
| sprint_ed |
|
|||
|
ok well its all in and running great although i need a new engine mount, and that aint cheap
|
|||
| Top | |
|||
| xr8ute |
|
||
|
Which springs did you end up using? The Crane 'conical' springs or something else?
|
||
| Top | |
||
| sprint_ed |
|
|||
|
yeah i used the crane ones, but it was verry close, the exhaust collets made the spring/retianer sit about 1mm from hitting the rocker arm, but it hasnt hit yet so should be fine, and actually putting them in has stopped some of the vibrations my car once had
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 40 guests |
