|
| EBXR8380 |
|
|||
|
Read through this site ..
http://forums.corral.net/forums/
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| Scaffy |
|
|||
|
Old mate never said he had a budget of $5,000, he said $5k worth of bolt ons, which is probably close for what he's mentioned.
As the others have said, 92mm tb is way too big. Run with a 65, or 70mm max. You will need to upgrade the MAF to at least an AU housing with your stock electrics. You'll peg that stock MAF once it's all fitted, with the cam you'll need to get any real benefit out of that combo. With all that in, you're going to need a set of at least 24lb injectors, because your 19s will max out well before peak power, which will come once you've had it tuned, which is required to run all these things...
_________________ Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20 |
|||
| Top | |
|||
| xr8boy |
|
||
|
{USERNAME} wrote: not sure how much kw/hp my motor has but has ported e7's,crane 2040 high lift (e303) cam, explorer intake 65mm t/b, au maf,underdrives, thermo's,pacemakers,3'' exhaust. Everythink seems well match and goes great but would like to get a chip done to suti as well. 347 would be great and set of decent heads you would be very happy but even decent set of heads,intake and cam on your motor you would happy as well.. phill Your combo is almost exactly as per my old EB. I did 168rwkw untuned Regarding old mates 5k worth of bolt ons everything is pretty well ok except for the throttle, 65mm is good for 450 at the fly. I would at least put an AU 70mm maf body and a T3 or 220 XR8 cam in it aswell as the 1.7's and you will easily hit 300fwkw
_________________ New project 5.4l 331ci S380R, 8.2 4.125 Man o war, Billet LAE crank, Jon Kaase Heads, Pauter Rods, JE pistons |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 16 guests |
